Back

Wire and Tube Clamps

Standard Medium Duty Clamps

35 Products

Narrowed By: 1.812 2.75 Inch
Clear All

CO2909Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO2909Z1
CO2909Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

1111 In Stock

CO2911Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO2911Z1
CO2911Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2913Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO2913Z1
CO2913Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2915Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO2915Z1
CO2915Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2917Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2917Z1
CO2917Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

COL2909SS, 1-13/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL2909SS
COL2909SS, 1-13/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2909Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL2909Z1
COL2909Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2911SS, 1-13/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL2911SS
COL2911SS, 1-13/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2911Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL2911Z1
COL2911Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2913SS, 1-13/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL2913SS
COL2913SS, 1-13/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2913Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL2913Z1
COL2913Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

325 In Stock

COL2915SS, 1-13/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.468 Screw Hole

SKU: COL2915SS
COL2915SS, 1-13/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2915Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: COL2915Z1
COL2915Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2917SS, 1-13/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.531 Screw Hole

SKU: COL2917SS
COL2917SS, 1-13/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2917Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.531 Screw Hole

SKU: COL2917Z1
COL2917Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4409SS, 2-3/4 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL4409SS
COL4409SS, 2-3/4 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4409Z1, 2-3/4 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL4409Z1
COL4409Z1, 2-3/4 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

45 In Stock

COL4411SS, 2-3/4 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL4411SS
COL4411SS, 2-3/4 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4411Z1, 2-3/4 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL4411Z1
COL4411Z1, 2-3/4 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

1332 In Stock

COL4413SS, 2-3/4 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL4413SS
COL4413SS, 2-3/4 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4413Z1, 2-3/4 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL4413Z1
COL4413Z1, 2-3/4 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

363 In Stock

COL4415SS, 2-3/4 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.468 Screw Hole

SKU: COL4415SS
COL4415SS, 2-3/4 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4415Z1, 2-3/4 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: COL4415Z1
COL4415Z1, 2-3/4 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL4417SS, 2-3/4 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.531 Screw Hole

SKU: COL4417SS
COL4417SS, 2-3/4 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.