Back

Wire and Tube Clamps

J-Clips

CJV and CJ Series J Clips

158 Products

CJ0307Z1, 3/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.203 Screw Hole

SKU: CJ0307Z1
CJ0307Z1, 3/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.203 Screw Hole Diameter Manufactured by KMC Stampings

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0309Z1, 3/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0309Z1
CJ0309Z1, 3/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0311Z1, 3/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0311Z1
CJ0311Z1, 3/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0313Z1, 3/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0313Z1
CJ0313Z1, 3/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0407Z1, 1/4 In. J-Clip in Galvanized Steel, with No Cushion and 0.203 Screw Hole

SKU: CJ0407Z1
CJ0407Z1, 1/4 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.203 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0409Z1, 1/4 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0409Z1
CJ0409Z1, 1/4 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

4641 In Stock

CJ0411Z1, 1/4 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0411Z1
CJ0411Z1, 1/4 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

2045 In Stock

CJ0413Z1, 1/4 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0413Z1
CJ0413Z1, 1/4 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0507Z1, 5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.203 Screw Hole

SKU: CJ0507Z1
CJ0507Z1, 5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.203 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0509Z1, 5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0509Z1
CJ0509Z1, 5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

1497 In Stock

CJ0511Z1, 5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0511Z1
CJ0511Z1, 5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

7774 In Stock

CJ0513Z1, 5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0513Z1
CJ0513Z1, 5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0607Z1, 3/8 In. J-Clip in Galvanized Steel, with No Cushion and 0.203 Screw Hole

SKU: CJ0607Z1
CJ0607Z1, 3/8 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.203 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

1713 In Stock

CJ0609Z1, 3/8 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0609Z1
CJ0609Z1, 3/8 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

4275 In Stock

CJ0611Z1, 3/8 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0611Z1
CJ0611Z1, 3/8 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0613Z1, 3/8 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0613Z1
CJ0613Z1, 3/8 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

2400 In Stock

CJ0709Z1, 7/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0709Z1
CJ0709Z1, 7/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0711Z1, 7/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0711Z1
CJ0711Z1, 7/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0713Z1, 7/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0713Z1
CJ0713Z1, 7/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

2900 In Stock

CJ0809Z1, 1/2 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0809Z1
CJ0809Z1, 1/2 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

1167 In Stock

CJ0811Z1, 1/2 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0811Z1
CJ0811Z1, 1/2 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0813Z1, 1/2 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ0813Z1
CJ0813Z1, 1/2 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

409 In Stock

CJ0909Z1, 9/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ0909Z1
CJ0909Z1, 9/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CJ0911Z1, 9/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ0911Z1
CJ0911Z1, 9/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.