Back

Wire and Tube Clamps

Standard Medium Duty Clamps

40 Products

Narrowed By: 1.562 1.625 Inch
Clear All

CO2509Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO2509Z1
CO2509Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2511Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO2511Z1
CO2511Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2513Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO2513Z1
CO2513Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

500 In Stock

CO2515Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO2515Z1
CO2515Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2517Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2517Z1
CO2517Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2609Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO2609Z1
CO2609Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2611Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO2611Z1
CO2611Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2613Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO2613Z1
CO2613Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2615Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO2615Z1
CO2615Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2617Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2617Z1
CO2617Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

699 In Stock

COL2509SS, 1-9/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL2509SS
COL2509SS, 1-9/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2509Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL2509Z1
COL2509Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2511SS, 1-9/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL2511SS
COL2511SS, 1-9/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2511Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL2511Z1
COL2511Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2513SS, 1-9/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL2513SS
COL2513SS, 1-9/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2513Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL2513Z1
COL2513Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2515SS, 1-9/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.468 Screw Hole

SKU: COL2515SS
COL2515SS, 1-9/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2515Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: COL2515Z1
COL2515Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2517SS, 1-9/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.531 Screw Hole

SKU: COL2517SS
COL2517SS, 1-9/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2517Z1, 1-9/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.531 Screw Hole

SKU: COL2517Z1
COL2517Z1, 1-9/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

455 In Stock

COL2609SS, 1-5/8 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL2609SS
COL2609SS, 1-5/8 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

1350 In Stock

COL2609Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL2609Z1
COL2609Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

14 In Stock

COL2611SS, 1-5/8 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL2611SS
COL2611SS, 1-5/8 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2611Z1, 1-5/8 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL2611Z1
COL2611Z1, 1-5/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

683 In Stock