Back

Wire and Tube Clamps

Standard Medium Duty Clamps

40 Products

Narrowed By: 1.437 2.187 Inch
Clear All

CO2309Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO2309Z1
CO2309Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2311Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO2311Z1
CO2311Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2313Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO2313Z1
CO2313Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2315Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO2315Z1
CO2315Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2317Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2317Z1
CO2317Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3509Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO3509Z1
CO3509Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3511Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO3511Z1
CO3511Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3513Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO3513Z1
CO3513Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3515Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO3515Z1
CO3515Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3517Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO3517Z1
CO3517Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

COL2309SS, 1-7/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL2309SS
COL2309SS, 1-7/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2309Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL2309Z1
COL2309Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

3516 In Stock

COL2311SS, 1-7/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL2311SS
COL2311SS, 1-7/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2311Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL2311Z1
COL2311Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

3913 In Stock

COL2313SS, 1-7/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL2313SS
COL2313SS, 1-7/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2313Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL2313Z1
COL2313Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2315SS, 1-7/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.468 Screw Hole

SKU: COL2315SS
COL2315SS, 1-7/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

1500 In Stock

COL2315Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: COL2315Z1
COL2315Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2317SS, 1-7/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.531 Screw Hole

SKU: COL2317SS
COL2317SS, 1-7/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2317Z1, 1-7/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.531 Screw Hole

SKU: COL2317Z1
COL2317Z1, 1-7/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3509SS, 2-3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL3509SS
COL3509SS, 2-3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 5

391 In Stock

COL3509Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL3509Z1
COL3509Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3511SS, 2-3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL3511SS
COL3511SS, 2-3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3511Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL3511Z1
COL3511Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.