Back

Wire and Tube Clamps

Standard Medium Duty Clamps

36 Products

Narrowed By: 0.187 2.187
Clear All

COV0409Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with Vinyl Cushion and 0.281 Screw Hole

SKU: COV0409Z1
COV0409Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Vinyl Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

215890 In Stock

CO0309AL, 3/16 In. Aluminum Clamp with No cushion and 0.281 Screw Hole

SKU: CO0309AL
CO0309AL, 3/16 In. Medium Duty Aluminum Clamp with No cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

2000 In Stock

CO0309Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO0309Z1
CO0309Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO0311Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO0311Z1
CO0311Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

1725 In Stock

CO0313Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO0313Z1
CO0313Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 100

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3509Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO3509Z1
CO3509Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3511Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO3511Z1
CO3511Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3513Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO3513Z1
CO3513Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3515Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO3515Z1
CO3515Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3517Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO3517Z1
CO3517Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

COL0307Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.203 Screw Hole

SKU: COL0307Z1
COL0307Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.203 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

1967 In Stock

COL0309AL, 3/16 In. Aluminum Clamp with Rubber Cushion and 0.281 Screw Hole

SKU: COL0309AL
COL0309AL, 3/16 In. Medium Duty Aluminum Clamp with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

43 In Stock

COL0309SS, 3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL0309SS
COL0309SS, 3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

4918 In Stock

COL0309Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL0309Z1
COL0309Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

3778 In Stock

COL0311SS, 3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL0311SS
COL0311SS, 3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

1722 In Stock

COL0311Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL0311Z1
COL0311Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL0313SS, 3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL0313SS
COL0313SS, 3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

586 In Stock

COL0313Z1, 3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL0313Z1
COL0313Z1, 3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

3213 In Stock

COL3509SS, 2-3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL3509SS
COL3509SS, 2-3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 5

391 In Stock

COL3509Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL3509Z1
COL3509Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3511SS, 2-3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL3511SS
COL3511SS, 2-3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3511Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL3511Z1
COL3511Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3513SS, 2-3/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL3513SS
COL3513SS, 2-3/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL3513Z1, 2-3/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: COL3513Z1
COL3513Z1, 2-3/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

500 In Stock