Back

Clamps

Wire and Tube Clamps

60 Products

Narrowed By: 1.312 2.125
Clear All

CC2111Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2111Z1
CC2111Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2113Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2113Z1
CC2113Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2115Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2115Z1
CC2115Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2117Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2117Z1
CC2117Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CDL2109SS, 1-5/16 In. Double Tube in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: CDL2109SS
CDL2109SS, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.281 Hole Dia in 304 Stainless Steel

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2109Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: CDL2109Z1
CDL2109Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.281 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2111Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: CDL2111Z1
CDL2111Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.343 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2113Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: CDL2113Z1
CDL2113Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.406 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2115Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: CDL2115Z1
CDL2115Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.468 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2117Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.531 Screw Hole

SKU: CDL2117Z1
CDL2117Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.531 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CJ2109Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ2109Z1
CJ2109Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2111Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ2111Z1
CJ2111Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2113Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ2113Z1
CJ2113Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2117Z1, 1-5/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2117Z1
CO2117Z1, 1-5/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3409Z1, 2-1/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO3409Z1
CO3409Z1, 2-1/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3411Z1, 2-1/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO3411Z1
CO3411Z1, 2-1/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3413Z1, 2-1/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO3413Z1
CO3413Z1, 2-1/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3415Z1, 2-1/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CO3415Z1
CO3415Z1, 2-1/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO3417Z1, 2-1/8 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO3417Z1
CO3417Z1, 2-1/8 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

COL2109SS, 1-5/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: COL2109SS
COL2109SS, 1-5/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

200 In Stock

COL2109Z1, 1-5/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: COL2109Z1
COL2109Z1, 1-5/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

2000 In Stock

COL2111SS, 1-5/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.343 Screw Hole

SKU: COL2111SS
COL2111SS, 1-5/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

1202 In Stock

COL2111Z1, 1-5/16 In. Med Duty Clamp in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: COL2111Z1
COL2111Z1, 1-5/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with Rubber Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

COL2113SS, 1-5/16 In. Med Duty Clamp, in 304 Stainless with Rubber Cushion and 0.406 Screw Hole

SKU: COL2113SS
COL2113SS, 1-5/16 In. Medium Duty Clamp, in 304 Stainless Steel with Rubber Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 10

2016 In Stock