Back

Clamps

Wire and Tube Clamps

71 Products

Narrowed By: 1.312 1.812
Clear All

CC2111Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2111Z1
CC2111Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2113Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2113Z1
CC2113Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2115Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2115Z1
CC2115Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2117Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2117Z1
CC2117Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2911Z1, 1-13/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2911Z1
CC2911Z1, 1-13/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2913Z1, 1-13/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2913Z1
CC2913Z1, 1-13/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2915Z1, 1-13/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2915Z1
CC2915Z1, 1-13/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CC2917Z1, 1-13/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2917Z1
CC2917Z1, 1-13/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CDL2109SS, 1-5/16 In. Double Tube in 304 Stainless with Rubber Cushion and 0.281 Screw Hole

SKU: CDL2109SS
CDL2109SS, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.281 Hole Dia in 304 Stainless Steel

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2109Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.281 Screw Hole

SKU: CDL2109Z1
CDL2109Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.281 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2111Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.343 Screw Hole

SKU: CDL2111Z1
CDL2111Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.343 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2113Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.406 Screw Hole

SKU: CDL2113Z1
CDL2113Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.406 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2115Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.468 Screw Hole

SKU: CDL2115Z1
CDL2115Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.468 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CDL2117Z1, 1-5/16 In. Double Tube in Galvanized Steel, with Rubber Cushion and 0.531 Screw Hole

SKU: CDL2117Z1
CDL2117Z1, 1-5/16 in Dia. Double Tube Clamp, EPDM Rubber Cushion, with 0.531 Hole Dia in Hot-Dipped Galvanized Steel, Chem-Treated G90

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running approximately 10-12 weeks. Contact us for further information.

CJ2109Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ2109Z1
CJ2109Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2111Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ2111Z1
CJ2111Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2113Z1, 1-5/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ2113Z1
CJ2113Z1, 1-5/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2909Z1, 1-13/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CJ2909Z1
CJ2909Z1, 1-13/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2911Z1, 1-13/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CJ2911Z1
CJ2911Z1, 1-13/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CJ2913Z1, 1-13/16 In. J-Clip in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CJ2913Z1
CJ2913Z1, 1-13/16 In. J-Clip in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2117Z1, 1-5/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CO2117Z1
CO2117Z1, 1-5/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2909Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CO2909Z1
CO2909Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

1111 In Stock

CO2911Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CO2911Z1
CO2911Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.

CO2913Z1, 1-13/16 In. Med Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CO2913Z1
CO2913Z1, 1-13/16 In. Medium Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Due to high demand, lead time is running 8-10 weeks. Contact us for further information.