Part# TTP1000450SS
18-8 Stainless Steel, Plain
Supplied by Stanlok
Nut is not included
#10 X 4 1/2 In. Taper Pin Size
0.610 In. Small End Diameter
0.7039 In. Large End Diameter
5.437 In. Total Length with 4.5 In. Useable Length
5/8-18 Thread Size
✅ RoHS Compliant ✅ REACH Compliant
18-8 Stainless Steel, Plain
Supplied by Stanlok
Nut is not included
#10 X 4 1/2 In. Taper Pin Size
0.610 In. Small End Diameter
0.7039 In. Large End Diameter
5.437 In. Total Length with 4.5 In. Useable Length
5/8-18 Thread Size
✅ RoHS Compliant ✅ REACH Compliant
Threaded taper pins are used whenever a taper pin has to be removed from the driven side. Threaded taper pins are 0.002" smaller on the large end diameter to allow the pin to be inserted approximately 3/32" deper int the taper-reamed hole. The lare end of the pin is recessed below the surface which allows the nut to bear on the surface when tightened to pull the pin out.