Please log in to see price or purchase this item
Part# TTP0800250PL
Carbon Steel, Plain
Supplied by Stanlok
Nut is not included
#8 X 2 1/2 In. Taper Pin Size
0.438 In. Small End Diameter
0.49 In. Large End Diameter
3.187 In. Total Length with 2.5 In. Useable Length
7/16-20 Thread Size
✅ RoHS Compliant ✅ REACH Compliant
Carbon Steel, Plain
Supplied by Stanlok
Nut is not included
#8 X 2 1/2 In. Taper Pin Size
0.438 In. Small End Diameter
0.49 In. Large End Diameter
3.187 In. Total Length with 2.5 In. Useable Length
7/16-20 Thread Size
✅ RoHS Compliant ✅ REACH Compliant
Threaded taper pins are used whenever a taper pin has to be removed from the driven side. Threaded taper pins are 0.002" smaller on the large end diameter to allow the pin to be inserted approximately 3/32" deper int the taper-reamed hole. The lare end of the pin is recessed below the surface which allows the nut to bear on the surface when tightened to pull the pin out.