Part# SHI-350ST ZD
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
3.5 In. Shaft Diameter, Inverted External Ring
3.237 In. Free Inside Diameter
0.109 In. Thick
0.125 In. Hole Diameter
3.316 In. Groove Diameter
0.12 In. Groove Width
0.092 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
3.5 In. Shaft Diameter, Inverted External Ring
3.237 In. Free Inside Diameter
0.109 In. Thick
0.125 In. Hole Diameter
3.316 In. Groove Diameter
0.12 In. Groove Width
0.092 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
External inverted ring in carbon steel, zinc Dichromate. Inverted retaining rings are a variation of axially assembled rings in which the lug holes are inverted to fit in the bottom of the groove. Inverting the lugs allows greater clearance on a shaft or in a housing and forms a higher uniform shoulder good for retaining bearings and other components with large corner radii or chamfers.