• Home
  • HO-112ST ZD, 1-1/8 in. Dia Internal Ring, 0.05 In. Thick Carbon Steel Zinc Yellow

HO-112ST ZD, 1-1/8 in. Dia Internal Ring, 0.05 In. Thick Carbon Steel Zinc Yellow

SKU: HO-112ST ZD
(0) No Reviews yet
$0.32
QuantityPrice
50 – 99$0.32
100 – 499$0.13
500 – 999$0.12
1000 – 2499$0.11
2500 – 4999$0.10
5000 – 9999$0.09
10000 – 24999$0.08
25000 +$0.08

17050 In Stock

(*) Minimum Quantity: 50

Part# HO-112ST ZD

Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip

1.125 In. Housing Diameter, Basic Internal Ring
1.249 In. Free Outside Diameter
0.05 In. Thick
0.078 In. Hole Diameter

1.197 In. Groove Diameter
0.056 In. Groove Width
0.036 In. Groove Depth
Basic internal retaining ring in carbon steel, zinc yellow plated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.

Ratings & Reviews

No reviews available

Be the first to Write a Review