Part# DSR-60ST PA
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Heavy Duty External Retaining Ring
Manufactured by Rotor Clip
60 mm Shaft Diameter
55.8 mm Free Intside Diameter
3 mm Thickness
2.5 mm Hole Diameter
57 mm Groove Diameter
3.15 mm Groove Width
1.5 Groove Depth
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Heavy Duty External Retaining Ring
Manufactured by Rotor Clip
60 mm Shaft Diameter
55.8 mm Free Intside Diameter
3 mm Thickness
2.5 mm Hole Diameter
57 mm Groove Diameter
3.15 mm Groove Width
1.5 Groove Depth
Metric heavy duty external retaining ring in carbon steel. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.