Please log in to see price or purchase this item
Part# DHO-78ST PA
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Basic Internal Retaining Ring to DIN 472
Manufactured by Rotor Clip
78 mm Housing Diameter
82.5 mm Free Outside Diameter
2.5 mm Thickness
3 mm Hole Diameter
81 mm Groove Diameter
2.65 mm Groove Width
1.5 Groove Depth
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Basic Internal Retaining Ring to DIN 472
Manufactured by Rotor Clip
78 mm Housing Diameter
82.5 mm Free Outside Diameter
2.5 mm Thickness
3 mm Hole Diameter
81 mm Groove Diameter
2.65 mm Groove Width
1.5 Groove Depth
Metric basic internal retaining ring manufactured to DIN472. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
DIN472