• Home
  • SH-100ST PA, 1 in. Dia External Ring, 0.042 In. Thick Carbon Steel Phosphate

SH-100ST PA, 1 in. Dia External Ring, 0.042 In. Thick Carbon Steel Phosphate

(0) No Reviews yet
100 – 499$0.0978
500 – 999$0.0889
1000 – 2499$0.0815
2500 – 4999$0.0752
5000 – 9999$0.0698
10000 – 24999$0.0652
25000 +$0.0635

56733 In Stock

(*) Minimum Quantity: 100

Part# SH-100ST PA

Carbon Steel, Black Phosphate
Manufactured by Rotor Clip

1.000 In. Shaft Diameter, Basic External Ring
0.925 In. Free Inside Diameter
0.042 In. Thick
0.078 In. Hole Diameter

0.940 In. Groove Diameter
0.046 In. Groove Width
0.030 In. Groove Depth
Basic external retaining ring in carbon steel, phosphate finish. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.
Related terms: Waldes, Truarc, Anderton, IRR, SH Series, 5100, 3100, N1400, 5100-100SPPB, 5100-100SPPB, 3100-100-ST-PA, 1400-100-PP, 100-11100

Ratings & Reviews

No reviews available

Be the first to Write a Review