Please log in to see price or purchase this item
Part# HOI-137ST ZD
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
1.375 In. Housing Diameter, Inverted Internal Ring
1.486 In. Free Outside Diameter
0.05 In. Thick
0.05 In. Hole Diameter
1.461 In. Groove Diameter
0.056 In. Groove Width
0.043 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
1.375 In. Housing Diameter, Inverted Internal Ring
1.486 In. Free Outside Diameter
0.05 In. Thick
0.05 In. Hole Diameter
1.461 In. Groove Diameter
0.056 In. Groove Width
0.043 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Inverted internal retaining ring in carbon steel, zinc Dichromate. Inverted retaining rings are a variation of axially assembled rings in which the lug holes are inverted to fit in the bottom of the groove. Inverting the lugs allows greater clearance on a shaft or in a housing and forms a higher uniform shoulder good for retaining bearings and other components with large corner radii or chamfers.