• Home
  • HO-37ST ZD, 3/8 in. Dia Internal Ring, 0.025 In. Thick Carbon Steel Zinc Yellow

The HO-37ST ZD is the most common internal retaining ring for a 3/8 inch diameter application with a thickness of 0.025 inches, crafted from Carbon Steel with a Zinc Dichromate Yellow finish. This retaining ring is manufactured by Rotor Clip. Made in USA

Details

Details

Part# HO-37ST ZD

Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
Made in USA

0.375 In. Housing Diameter, Basic Internal Ring
0.415 In. Free Outside Diameter
0.025 In. Thick
0.041 In. Hole Diameter

0.397 In. Groove Diameter
0.029 In. Groove Width
0.011 In. Groove Depth

WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
QuantityPrice
100 - 499$0.1550
500 - 999$0.1240
1000 - 4999$0.1130
5000 - 9999$0.1040
10000 +$0.0960

12350 In Stock

(*) Minimun Quantity: 100

More information

Basic internal retaining ring in carbon steel, zinc yellow plated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.