Part# DHR-85ST PA
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Heavy Duty Internal Retaining Ring
Manufactured by Rotor Clip
85 mm Housing Diameter
90.5 mm Free Outside Diameter
4 mm Thickness
3.5 mm Hole Diameter
88.5 mm Groove Diameter
4.15 mm Groove Width
1.75 Groove Depth
Carbon Spring Steel SAE 1060-1090, Phosphate & Oil
Heavy Duty Internal Retaining Ring
Manufactured by Rotor Clip
85 mm Housing Diameter
90.5 mm Free Outside Diameter
4 mm Thickness
3.5 mm Hole Diameter
88.5 mm Groove Diameter
4.15 mm Groove Width
1.75 Groove Depth
A reinforced/thicker version of the DHO Series featuring a larger radial width. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.