KMC Stampings

KMC’s extensive range of clips and clamps set the industry standard over 110 years ago. Our standard products are specified by many of the best-known manufacturers for use in safely securing wire, cable, tubes, and pipes.

1954 Products

CC1911Z1, 1-3/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC1911Z1
CC1911Z1, 1-3/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC1913Z1, 1-3/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC1913Z1
CC1913Z1, 1-3/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC1915Z1, 1-3/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC1915Z1
CC1915Z1, 1-3/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC1917Z1, 1-3/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC1917Z1
CC1917Z1, 1-3/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2011Z1, 1-1/4 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2011Z1
CC2011Z1, 1-1/4 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 50

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2013Z1, 1-1/4 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2013Z1
CC2013Z1, 1-1/4 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2015Z1, 1-1/4 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2015Z1
CC2015Z1, 1-1/4 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2017Z1, 1-1/4 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2017Z1
CC2017Z1, 1-1/4 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 25

457 In Stock

CC2111Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2111Z1
CC2111Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2113Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2113Z1
CC2113Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2115Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2115Z1
CC2115Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2117Z1, 1-5/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2117Z1
CC2117Z1, 1-5/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2211Z1, 1-3/8 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2211Z1
CC2211Z1, 1-3/8 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2213Z1, 1-3/8 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2213Z1
CC2213Z1, 1-3/8 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2215Z1, 1-3/8 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2215Z1
CC2215Z1, 1-3/8 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2217Z1, 1-3/8 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2217Z1
CC2217Z1, 1-3/8 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2311Z1, 1-7/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2311Z1
CC2311Z1, 1-7/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2313Z1, 1-7/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2313Z1
CC2313Z1, 1-7/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2315Z1, 1-7/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2315Z1
CC2315Z1, 1-7/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2317Z1, 1-7/16 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2317Z1
CC2317Z1, 1-7/16 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2411Z1, 1-1/2 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CC2411Z1
CC2411Z1, 1-1/2 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2413Z1, 1-1/2 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CC2413Z1
CC2413Z1, 1-1/2 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2415Z1, 1-1/2 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.468 Screw Hole

SKU: CC2415Z1
CC2415Z1, 1-1/2 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.468 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.

CC2417Z1, 1-1/2 In. Hvy Duty Clamp in Galvanized Steel, with No Cushion and 0.531 Screw Hole

SKU: CC2417Z1
CC2417Z1, 1-1/2 In. Heavy Duty Clamp in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.531 Screw Hole Diameter Manufactured by KMC Stampings

(*) Minimum Quantity: 500

Currently out of stock. Typical lead time is approximately 6-8 weeks. Contact us for further information.