Please log in to see price or purchase this item
Part# SHR-125ST ZD
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
1.25 In. Shaft Diameter, Heavy Duty External Ring
1.15 In. Free Inside Diameter
0.093 In. Thick
0.093 In. Hole Diameter
1.174 In. Groove Diameter
0.103 In. Groove Width
0.038 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip
1.25 In. Shaft Diameter, Heavy Duty External Ring
1.15 In. Free Inside Diameter
0.093 In. Thick
0.093 In. Hole Diameter
1.174 In. Groove Diameter
0.103 In. Groove Width
0.038 In. Groove Depth
⚠WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Basic heavy duty external retaining ring in carbon steel, zinc Dichromate. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.