• Home
  • SH-475ST ZD, 4-3/4 in. Dia External Ring, 0.109 In. Thick Carbon Steel Zinc Dich

SH-475ST ZD, 4-3/4 in. Dia External Ring, 0.109 In. Thick Carbon Steel Zinc Dich

SKU: SH-475ST ZD
(0) No Reviews yet

53 In Stock

53 In Stock

(*) Minimum Quantity: 1

Part# SH-475ST ZD

Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip

4.75 In. Shaft Diameter, Basic External Ring
4.458 In. Free Inside Diameter
0.109 In. Thick
0.125 In. Hole Diameter

4.55 In. Groove Diameter
0.12 In. Groove Width
0.1 In. Groove Depth

WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Basic external retaining ring in carbon steel, zinc Dichromate. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.

Ratings & Reviews

No reviews available

Be the first to Write a Review