• Home
  • SH-46ST ZD, 15/32 in. Dia External Ring, 0.025 In. Thick Carbon Steel Zinc Dich

SH-46ST ZD, 15/32 in. Dia External Ring, 0.025 In. Thick Carbon Steel Zinc Dich

SKU: SH-46ST ZD
(0) No Reviews yet

3333 In Stock

3333 In Stock

(*) Minimum Quantity: 100

Part# SH-46ST ZD

Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip

0.469 In. Shaft Diameter, Basic External Ring
0.428 In. Free Inside Diameter
0.025 In. Thick
0.041 In. Hole Diameter

0.443 In. Groove Diameter
0.029 In. Groove Width
0.013 In. Groove Depth
Basic external retaining ring in carbon steel, zinc Dichromate. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.

Ratings & Reviews

No reviews available

Be the first to Write a Review