• Home
  • HO-375ST ZD, 3-3/4 in. Dia Internal Ring, 0.109 In. Thick Carbon Steel Zinc Yellow

HO-375ST ZD, 3-3/4 in. Dia Internal Ring, 0.109 In. Thick Carbon Steel Zinc Yellow

SKU: HO-375ST ZD
(0) No Reviews yet

263 In Stock

263 In Stock

(*) Minimum Quantity: 1

Part# HO-375ST ZD

Carbon Steel, Zinc Dichromate Yellow
Manufactured by Rotor Clip

3.74 In. Housing Diameter, Basic Internal Ring
4.157 In. Free Outside Diameter
0.109 In. Thick
0.125 In. Hole Diameter

3.964 In. Groove Diameter
0.12 In. Groove Width
0.112 In. Groove Depth

WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Basic internal retaining ring in carbon steel, zinc yellow plated. Tapered section retaining rings decrease symmetrically from the center to the free ends, remaining circular when contracted or expanded within the limits of normal use. This assures contact with the groove along the entire periphery of the ring. These rings may be installed axially (horizontally along the center point of an axis) or radially (externally along the radius of a circle). Axially assembled retaining rings are installed into machined grooves in housings/bores (internal) or on shafts (external). These rings are manufactured with lug holes—small holes in the lugs of both axial internal and external retaining rings—that are used to install/remove them, using pliers designed for this purpose.

Ratings & Reviews

No reviews available

Be the first to Write a Review