Part# GA1872000G2ZN
Low Carbon Steel, Zinc Plated
Manufactured by Driv-Lok
3/16 X 2, Type A Groove Pin
0.1855 - 0.1875 Pin Diameter
2 Length with +.010 Length Tolerance
0.191 Compatible Hole Diameter
Low Carbon Steel, Zinc Plated
Manufactured by Driv-Lok
3/16 X 2, Type A Groove Pin
0.1855 - 0.1875 Pin Diameter
2 Length with +.010 Length Tolerance
0.191 Compatible Hole Diameter
Grooved pins are non-threaded press fit fasteners. Commonly used as locking devices, pivots, bearing faces or locating elements where there is not a high degree of end load.