Light Duty Flared Edge Clamps

CFV and CF Series Light Duty Clamps with Flared Edges

87 Products

CF0311Z1, 3/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0311Z1
CF0311Z1, 3/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0313Z1, 3/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0313Z1
CF0313Z1, 3/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.25

(*) Minimum Quantity: 50

6120 In Stock

CF0409Z1, 1/4 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0409Z1
CF0409Z1, 1/4 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.22

(*) Minimum Quantity: 50

1950 In Stock

CF0411Z1, 1/4 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0411Z1
CF0411Z1, 1/4 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0413Z1, 1/4 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0413Z1
CF0413Z1, 1/4 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.24

(*) Minimum Quantity: 50

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0509Z1, 5/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0509Z1
CF0509Z1, 5/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.06

(*) Minimum Quantity: 100

23409 In Stock

CF0511Z1, 5/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0511Z1
CF0511Z1, 5/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.25

(*) Minimum Quantity: 50

14256 In Stock

CF0513Z1, 5/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0513Z1
CF0513Z1, 5/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.27

(*) Minimum Quantity: 50

4910 In Stock

CF0609Z1, 3/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0609Z1
CF0609Z1, 3/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.06

(*) Minimum Quantity: 100

800 In Stock

CF0611Z1, 3/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0611Z1
CF0611Z1, 3/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.22

(*) Minimum Quantity: 50

6150 In Stock

CF0613Z1, 3/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0613Z1
CF0613Z1, 3/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.20

(*) Minimum Quantity: 50

15000 In Stock

CF0709Z1, 7/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0709Z1
CF0709Z1, 7/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.07

(*) Minimum Quantity: 100

14744 In Stock

CF0711Z1, 7/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0711Z1
CF0711Z1, 7/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0713Z1, 7/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0713Z1
CF0713Z1, 7/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0809Z1, 1/2 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0809Z1
CF0809Z1, 1/2 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.52

(*) Minimum Quantity: 25

2136 In Stock

CF0811Z1, 1/2 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0811Z1
CF0811Z1, 1/2 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF0813Z1, 1/2 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0813Z1
CF0813Z1, 1/2 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.35

(*) Minimum Quantity: 50

1975 In Stock

CF0909Z1, 9/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF0909Z1
CF0909Z1, 9/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.52

(*) Minimum Quantity: 25

2000 In Stock

CF0911Z1, 9/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF0911Z1
CF0911Z1, 9/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.07

(*) Minimum Quantity: 100

3135 In Stock

CF0913Z1, 9/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF0913Z1
CF0913Z1, 9/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.28

(*) Minimum Quantity: 50

120 In Stock

CF1009Z1, 5/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF1009Z1
CF1009Z1, 5/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.24

(*) Minimum Quantity: 50

886 In Stock

CF1011Z1, 5/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.343 Screw Hole

SKU: CF1011Z1
CF1011Z1, 5/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.343 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF1013Z1, 5/8 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.406 Screw Hole

SKU: CF1013Z1
CF1013Z1, 5/8 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.406 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.

CF1109Z1, 11/16 In. Light Duty Clamp, in Galvanized Steel, with No Cushion and 0.281 Screw Hole

SKU: CF1109Z1
CF1109Z1, 11/16 In. Light Duty Clamp, in Hot-Dipped Galvanized Steel, Chem-Treated G90 with No Cushion and 0.281 Screw Hole Diameter Manufactured by KMC Stampings
$0.18

(*) Minimum Quantity: 1250

Currently out of stock. Typical lead time is 4-6 weeks. Contact us for further information.