Retaining rings, Snap ring pliers, Retaining ring applicator, Snap ring applicator

rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEARANCE DIA.

DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER THICKNESS
*** THICKNESS
BEVELED END Weight Per 1000 Pcs. Expanded over shaft Released in groove

Ds
DEC Ds
FRACT Ds
mm Dg Tol. W Tol. d Df Tol. T Tol. U Tol. lbs. L1 L2

VSH-100 1.000 1 25.4 .930 +.000
-.003
.004* .037 +.005
-.000 .035 .925
+.005
-.010
.042 ±.002 .034 ±.001 3.6 1.41 1.38

VSH-102 1.023 - 26.0 .951 .036 .036 .946 .042 .033 3.9 1.43 1.40

VSH-106 1.062 1-1/16 27.0 .992 +.000
-.004
.005* .044 .035 .982 .
.
+.010
-.015 .050 .041 4.8 1.50 1.47

VSH-112 1.125 1-1/8 28.6 1.051 .044 .037 1.041 .050 .041 5.1 1.55 1.52

VSH-118 1.188 1-3/16 30.2 1.108 .044 .040 1.098 .050 .041 5.6 1.61 1.57

VSH-125 1.250 1-1/4 31.7 1.166 .043 .042 1.156 .050 .040 5.9 1.69 1.65

VSH-131 1.312 1-5/16 33.3 1.224 .042 .044 1.214 .050 .039 6.8 1.75 1.71

VSH-137 1.375 1 -3/8 34.9 1.282 .042 .046 1.272 .050 .039 7.2 1.80 1.76

VSH-143 1.438 1-7/16 36.5 1.343 .042 .047 1.333 .050 .039 8.1 1.87 1.83

VSH-150 1.500 1-1/2 38.1 1.397 .041 .051 1.387 .050 .038 9.0 1.99 1.95

VSH-156 1.562 1-9/16 39.7 1.459 +.000
-.005
.005* .053 .051 1.446 +.013
-.020 .062 ±.003 .049 12.4 2.10 2.05

VSH-162 1.625 1-5/8 41.3 1.516 .053 .054 1.503 .062 .049 13.2 2.17 2.13

VSH-168 1.688 1-11/16 42.9 1.573 .052 .057 1.560 .062 .048 14.8 2.24 2.20

VSH-175 1.750 1-3/4 44.4 1.631 .052 .059 1.618 .062 .048 15.3 2.31 2.26

VSH-177 1.772 - 45.0 1.650 .052 .061 1.637 .062 .048 15.4 2.33 2.28

VSH-181 1.812 1-13/16 46.0 1.688 .052 .062 1.675 .062 .048 16.2 2.38 2.33

VSH-187 1.875 1-7/8 47.6 1.748 .052 .063 1.735 .062 .048 17.3 2.44 2.39

VSH-196 1.969 1-31/32 50.0 1.832 .051 .068 1.819 .062 .047 18.0 2.54 2.48

VSH-200 2.000 2 50.8 1.863 .051 .068 1.850 .062 .047 19.0 2.55 2.49

VSH-206 2.062 2-1/16 52.4 1.921 .
.
+.000
-.006
.006* .067 .
.
+.007
-.000 .070 1.906 .
.
+.015
-.025 .078 .062 ±.0015 25.0 2.68 2.62

VSH-212 2.125 2-1/8 54.0 1.979 .067 .073 1.964 .078 .062 26.1 2.75 2.68

VSH-215 2.156 2-5/32 54.8 2.008 .067 .074 1.993 .078 .062 26.3 2.78 2.71

VSH-225 2.250 2-1/4 57.1 2.096 .066 .077 2.081 .078 .061 27.7 2.87 2.80

VSH-231 2.312 2-5/16 58.7 2.154 .065 .079 2.139 .078 .060 28.0 2.94 2.87

VSH-237 2.375 2-3/8 60.3 2.212 .065 .081 2.197 .078 .060 29.2 3.01 2.94

VSH-243 2.438 2-7/16 61.9 2.270 .065 .084 2.255 .078 .060 29.5 3.07 3.00

VSH-250 2.500 2-1/2 63.5 2.328 .064 .086 2.313 .078 .059 29.7 3.12 3.04

VSH-255 2.559 - 65.0 2.397 .064 .081 2.377 +.020
-.030 .078 .059 33.9 3.18 3.10

VSH-262 2.625 2-5/8 66.7 2.448 .064 .088 2.428 .078 .059 35.0 3.25 3.17

VSH-268 2.688 2-11/16 68.3 2.505 .064 .091 2.485 .078 .059 36.0 3.32 3.24

VSH-275 2.750 2-3/4 69.8 2.563 .079 .093 2.543 .093 .073 ±.002 47.0 3.45 3.37

VSH-287 2.875 2-7/8 73.0 2.679 .078 .098 2.659 .093 .072 48.5 3.57 3.48

VSH-293 2.938 2-15/16 74.6 2.737 .078 .100 2.717 .093 .072 50.0 3.64 3.55

VSH-300 3.000 3 76.2 2.795 .077 .102 2.775 .093 .071 52.0 3.69 3.59

VSH-306 3.062 3-1/16 77.8 2.852 .077 .105 2.832 .093 .071 47.0 3.74 3.64

*** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS (T) AND BEVELED END THICKNESS (U) VALUES.
* F.I.M. (FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
FOR HARDNESS SPECIFICATIONS, SEE END OF THIS SECTION.

more
back to Rotor Clip Retaining Rings index chart

Visa & MasterCard - Same Day Shipping
same day shipping
Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955
sales@prospectfastener.com

A4092 ISO9001:2000

Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map

RING NO.	SHAFT			GROOVE SIZE					RING SIZE & WEIGHT							CLEARANCE DIA.
	DIAMETER			DIAMETER		WIDTH		DEPTH	FREE DIAMETER		THICKNESS ***		THICKNESS BEVELED END		Weight Per 1000 Pcs.	Expanded over shaft	Released in groove



	Ds DEC	Ds FRACT	Ds mm	Dg	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	U	Tol.	lbs.	L1	L2
	Ds DEC	Ds FRACT	Ds mm	Dg	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	U	Tol.	lbs.	L1	L2
VSH-100	1.000	1	25.4	.930	+.000 -.003 .004*	.037	+.005 -.000	.035	.925	+.005 -.010	.042	±.002	.034	±.001	3.6	1.41	1.38
VSH-102	1.023	-	26.0	.951	+.000 -.003 .004*	.036		.036	.946	+.005 -.010	.042		.033		3.9	1.43	1.40
VSH-106	1.062	1-1/16	27.0	.992	+.000 -.004 .005*	.044		.035	.982	. . +.010 -.015	.050		.041		4.8	1.50	1.47
VSH-112	1.125	1-1/8	28.6	1.051		.044		.037	1.041		.050		.041		5.1	1.55	1.52
VSH-118	1.188	1-3/16	30.2	1.108		.044		.040	1.098		.050		.041		5.6	1.61	1.57
VSH-125	1.250	1-1/4	31.7	1.166		.043		.042	1.156		.050		.040		5.9	1.69	1.65
VSH-131	1.312	1-5/16	33.3	1.224		.042		.044	1.214		.050		.039		6.8	1.75	1.71
VSH-137	1.375	1 -3/8	34.9	1.282		.042		.046	1.272		.050		.039		7.2	1.80	1.76
VSH-143	1.438	1-7/16	36.5	1.343		.042		.047	1.333		.050		.039		8.1	1.87	1.83
VSH-150	1.500	1-1/2	38.1	1.397		.041		.051	1.387		.050		.038		9.0	1.99	1.95
VSH-156	1.562	1-9/16	39.7	1.459	+.000 -.005 .005*	.053		.051	1.446	+.013 -.020	.062	±.003	.049		12.4	2.10	2.05
VSH-162	1.625	1-5/8	41.3	1.516		.053		.054	1.503		.062		.049		13.2	2.17	2.13
VSH-168	1.688	1-11/16	42.9	1.573		.052		.057	1.560		.062		.048		14.8	2.24	2.20
VSH-175	1.750	1-3/4	44.4	1.631		.052		.059	1.618		.062		.048		15.3	2.31	2.26
VSH-177	1.772	-	45.0	1.650		.052		.061	1.637		.062		.048		15.4	2.33	2.28
VSH-181	1.812	1-13/16	46.0	1.688		.052		.062	1.675		.062		.048		16.2	2.38	2.33
VSH-187	1.875	1-7/8	47.6	1.748		.052		.063	1.735		.062		.048		17.3	2.44	2.39
VSH-196	1.969	1-31/32	50.0	1.832		.051		.068	1.819		.062		.047		18.0	2.54	2.48
VSH-200	2.000	2	50.8	1.863		.051		.068	1.850		.062		.047		19.0	2.55	2.49
VSH-206	2.062	2-1/16	52.4	1.921	. . +.000 -.006 .006*	.067	. . +.007 -.000	.070	1.906	. . +.015 -.025	.078		.062	±.0015	25.0	2.68	2.62
VSH-212	2.125	2-1/8	54.0	1.979		.067		.073	1.964		.078		.062		26.1	2.75	2.68
VSH-215	2.156	2-5/32	54.8	2.008		.067		.074	1.993		.078		.062		26.3	2.78	2.71
VSH-225	2.250	2-1/4	57.1	2.096		.066		.077	2.081		.078		.061		27.7	2.87	2.80
VSH-231	2.312	2-5/16	58.7	2.154		.065		.079	2.139		.078		.060		28.0	2.94	2.87
VSH-237	2.375	2-3/8	60.3	2.212		.065		.081	2.197		.078		.060		29.2	3.01	2.94
VSH-243	2.438	2-7/16	61.9	2.270		.065		.084	2.255		.078		.060		29.5	3.07	3.00
VSH-250	2.500	2-1/2	63.5	2.328		.064		.086	2.313		.078		.059		29.7	3.12	3.04
VSH-255	2.559	-	65.0	2.397		.064		.081	2.377	+.020 -.030	.078		.059		33.9	3.18	3.10
VSH-262	2.625	2-5/8	66.7	2.448		.064		.088	2.428		.078		.059		35.0	3.25	3.17
VSH-268	2.688	2-11/16	68.3	2.505		.064		.091	2.485		.078		.059		36.0	3.32	3.24
VSH-275	2.750	2-3/4	69.8	2.563		.079		.093	2.543		.093		.073	±.002	47.0	3.45	3.37
VSH-287	2.875	2-7/8	73.0	2.679		.078		.098	2.659		.093		.072		48.5	3.57	3.48
VSH-293	2.938	2-15/16	74.6	2.737		.078		.100	2.717		.093		.072		50.0	3.64	3.55
VSH-300	3.000	3	76.2	2.795		.077		.102	2.775		.093		.071		52.0	3.69	3.59
VSH-306	3.062	3-1/16	77.8	2.852		.077		.105	2.832		.093		.071		47.0	3.74	3.64