Snap rings, Retaining rings, Retaining ring applicator, Snap ring applicator

constant section rings

RING SIZE SHAFT DIAMETER GROOVE SIZE RING DIMENSIONS ALLOWABLE
STATIC
THRUST
LOAD
(Lbs.)

Ds
DEC Ds
FRACT.
Ds
mm
DIAMETER WIDTH DEPTH FREE DIAMETER THICKNESS SECTION GAP NOTCH DIMENSIONS

Dg
+/-.006 W
+.005/-.000 d Df TOL. T
+/-.002 S
+/-.005 A*
+/-1/16 DEPTH
Nd +0/-.030 WIDTH
Nw REF

USH-206 2.062 2-1/16 52.4 1.946 .086 .058 1.926 +.000
-.060 .078 .187 .375 .093 .125 5400

USH-212 2.125 2-1/8 54.0 2.003 .086 .061 1.983 .078 .187 .375 .093 .125 5530

USH-215 2.156 2-5/32 54.8 2.032 .086 .062 2.012 .078 .187 .375 .093 .125 5680

USH-225 2.250 2-1/4 57.1 2.120 .086 .065 2.100 .078 .203 .375 .100 .125 6200

USH-231 2.312 2-5/16 58.7 2.178 .086 .067 2.158 .078 .203 .375 .100 .125 6580

USH-237 2.375 2-3/8 60.3 2.239 .086 .068 2.219 .078 .203 .375 .100 .125 6870

USH-243 2.438 2-7/16 61.9 2.299 .086 .069 2.279 .078 .203 .375 .100 .125 7130

USH-250 2.500 2-1/2 63.5 2.360 .086 .070 2.340 .078 .218 .375 .110 .125 7430

USH-255 2.559 - 65.0 2.419 .086 .070 2.399 .078 .218 .375 .110 .125 7590

USH-262 2.625 2-5/8 66.7 2.481 .086 .072 2.461 .078 .218 .375 .110 .125 8020

USH-268 2.688 2-11/16 68.3 2.541 .103 .073 2.521 +.000
-.080 .078 .218 .375 .110 .125 8320

USH-275 2.750 2-3/4 69.8 2.602 .103 .074 2.577 .093 .218 .500 .110 .125 8650

USH-287 2.875 2-7/8 73.0 2.721 .103 .077 2.696 .093 .218 .500 .110 .125 9330

USH-293 2.938 2-15/16 74.6 2.779 .103 .079 2.754 .093 .218 .500 .110 .125 9840

USH-300 3.000 3 76.2 2.838 .103 .081 2.813 .093 .218 .500 .110 .125 10310

USH-306 3.062 3-1/16 77.8 2.898 .103 .082 2.873 .093 .218 .500 .110 .125 10530

USH-312 3.125 3-1/8 79.4 2.957 .103 .084 2.932 .093 .218 .500 .110 .125 11170

USH-315 3.156 3-5/32 80.2 2.986 .103 .085 2.961 .093 .250 .500 .125 .125 11370

USH-325 3.250 3-1/4 82.5 3.076 .103 .087 3.051 .093 .250 .500 .125 .125 12000

USH-334 3.346 3-11/32 85.0 3.166 .103 .090 3.141 .093 .250 .500 .125 .125 12810

USH-343 3.438 3-7/16 87.3 3.257 .103 .090 3.232 .093 .250 .500 .125 .125 13100

USH-350 3.500 3-1/2 88.9 3.316 .120 .092 3.286 .109 .250 .500 .125 .125 13640

USH-354 3.543 - 90.0 3.357 .120 .093 3.327 .109 .250 .500 .125 .125 14000

USH-362 3.625 3-5/8 92.1 3.435 .120 .095 3.405 .109 .250 .500 .125 .125 14580

USH-368 3.688 3-11/16 93.7 3.493 .120 .097 3.463 .109 .250 .500 .125 .125 14650

USH-375 3.750 3-3/4 95.2 3.552 .120 .099 3.522 +.000
-.093 .109 .281 .562 .150 .125 15800

USH-387 3.875 3-7/8 98.4 3.673 .120 .101 3.643 .109 .281 .562 .150 .125 16600

USH-393 3.938 3-15/16 100.0 3.734 .120 .102 3.704 .109 .281 .562 .150 .125 17040

USH-400 4.000 4 101.6 3.792 .120 .104 3.762 .109 .281 .562 .150 .125 17640

USH-425 4.250 4-1/4 108.0 4.065 .120 .092 4.025 .109 .281 .625 .150 .125 16600

USH-437 4.375 4-3/8 111.1 4.190 .120 .092 4.150 .109 .281 .625 .150 .125 17100

USH-450 4.500 41/2 114.3 4.310 .120 .095 4.270 .109 .312 .625 .180 .125 18230

USH-475 4.750 4-3/4 120.6 4.550 .120 .100 4.510 .109 .312 .625 .180 .125 19160

USH-500 5.000 5 127.0 4.790 .120 .105 4.750 .109 .312 .625 .180 .125 22280

*Installed In Groove.

Material: SAE 1060/1075 carbon spring steel

Hardness: ALL
Ring Sizes HRc

47-53

NOTE: Rotor Clip can produce any size ring you require. Call Technical Sales- 1-800-557-6867.