| RING NO. | HOUSING | RING SIZE & WEIGHT | Min. Distance Face of part to end of housing | |||||||||
| DIAMETER Inches |
INSIDE DIAMETER |
THICKNESS *** |
No. of Prongs | Thrust Load | Weight Per 1000 Pcs. | |||||||
| Dh DEC |
Dh FRACT |
Dh mm |
||||||||||
| FROM | TO | I.D. | Tol. | T | Tol. | lbs. | lbs. | D1 | ||||
| TI-31 | .311 | .313 | 5/16 | 7.92 | .136 | ±.005 . |
.010 | ±.001 | 6 | 81 | .11 | .040 |
| TI-37 | .374 | .376 | 3/8 | 9.53 | .175 | 6 | 76 | .16 | .040 | |||
| TI-43 | .437 | .439 | 7/16 | 11.13 | .237 | 6 | 71 | .20 | .040 | |||
| TI-44 | .440 | .442 | - | 11.20 | .258 | 6 | 41 | .18 | .040 | |||
| TI-50 | .498 | .502 | 1/2 | 12.7 | .258 | ±.010 | 6 | 61 | .24 | .040 | ||
| TI-56 | .560 | .564 | 9/16 | 14.27 | .312 | 6 | 51 | .29 | .040 | |||
| TI-62 | .623 | .627 | 5/8 | 15.85 | .390 | 6 | 46 | .30 | .040 | |||
| TI-63 | .638 | .640 | - | 16.23 | .390 | 6 | 43 | .32 | .040 | |||
| TI-75 | .748 | .752 | 3/4 | 19.05 | .500 | .015 | ±.002 | 8 | 76 | .62 | .060 | |
| TI-87 | .873 | .877 | 7/8 | 22.23 | .625 | 8 | 71 | .75 | .060 | |||
| TI-93 | .936 | .940 | 15/16 | 23.83 | .687 | 10 | 71 | .85 | .060 | |||
| TI-100 | .998 | 1.002 | 1 | 25.4 | .750 | 10 | 75 | .91 | .060 | |||
| TI-112 | 1.123 | 1.127 | 1 1/8 | 28.58 | .813 | 10 | 60 | 1.30 | .060 | |||
| TI-125 | 1.248 | 1.252 | 1 1/4 | 31.75 | .938 | 10 | 60 | 1.50 | .060 | |||
| TI-143 | 1.436 | 1.44 | 1 7/16 | 36.51 | 1.117 | 12 | 60 | 1.73 | .060 | |||
| TI-150 | 1.498 | 1.502 | 1 1/2 | 38.10 | 1.188 | 12 | 60 | 1.80 | .060 | |||
| TI-175 | 1.748 | 1.752 | 1 3/4 | 44.45 | 1.438 | 12 | 55 | 2.10 | .060 | |||
| TI-200 | 1.998 | 2.002 | 2 | 50.80 | 1.600 | 14 | 55 | 3.00 | .060 | |||
| ***
FOR PLATED RINGS ADD .002" TO MAXIMUM THICKNESS. LARGER SIZES MAY BE AVAILABLE UPON REQUEST. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. |
| TABLE
1: HARDNESS RANGES-ROTOR CLIP STAINLESS STEEL RINGS (PH 15-7 MO)
|
TABLE
2: HARDNESS RANGES-ROTOR CLIP BERYLLIUM COPPER RINGS .
|
TABLE
3: HARDNESS RANGES-ROTOR CLIP CARBON STEEL RINGS (SAE 1060-1090)
|
| * Hardness cannot be checked with any degree of accuracy directly on thses rings |
 back to Rotor Clip Retaining Rings
index chart |
|||||||||||
 |
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|||||||||||
|
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
