| RING NO. | SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | CLEARANCE DIA. | î THRUST LD. (lbs.) Sqr. Corner Abutment Groove w/90 wall | ||||||||||||
| DIAMETER inches |
DIAMETER | WIDTH | DEPTH | FREE DIAMETER |
THICKNESS *** |
Weight. Per 1000 Pcs. | Expanded over shaft | Released in groove | |||||||||
| Ring Safety Factor of 4 | Groove Safety Factor of 2 | ||||||||||||||||
| Ds DEC |
Tol. | Ds FRACT |
|||||||||||||||
| Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lBS. | L1 | L2 | Pr | Pg | ||||
| SHM-10 | .101 | . ±.001 |
- | .093 | ±.001 .0015* |
.024 | . +.002 -.000 |
.004 | .090 | ±.002 . |
.020 | ±.002 | .036 | .160 | .152 | SEE NOTE BELOW ** |
30 |
| SHM-12 | .125 | 1/8 | .115 | .024 | .005 | .112 | .020 | .050 | .186 | .176 | 40 | ||||||
| SHM-13 | .134 | - | .124 | .024 | .005 | .120 | .020 | .059 | .197 | .187 | 45 | ||||||
| SHM-15 | .156 | 5/32 | .144 | .029 | .006 | .140 | .025 | .122 | .252 | .240 | 65 | ||||||
| SHM-18 | .188 | 3/16 | .174 | .029 | .007 | .168 | ±.003 | .025 | .179 | .297 | .283 | 90 | |||||
| SHM-20 | .203 | 13/64 | .189 | .029 | .007 | .180 | .025 | .167 | .302 | .288 | 100 | ||||||
| SHM-22 | .219 | ±.0015 | 7/32 | .205 | . ±.0015 +.002* |
.039 | +.003 -.000 |
.007 | .200 | .035 | .334 | .345 | .331 | 110 | |||
| SHM-25 | .250 | 1/4 | .232 | .039 | .009 | .224 | .035 | .386 | .384 | .366 | 160 | ||||||
| SHM-26 | .266 | 17/64 | .248 | .039 | .009 | .240 | .035 | .416 | .406 | .388 | 170 | ||||||
| SHM-31 | .312 | 5/16 | .292 | .039 | .010 | .284 | .035 | .626 | .478 | .458 | 220 | ||||||
| SHM-32 | .328 | 21/64 | .308 | .039 | .010 | .300 | .035 | .688 | .498 | .480 | 230 | ||||||
| SHM-37 | .375 | 3/8 | .351 | ±.002 .002* |
.046 | .012 | .340 | .042 | 1.035 | .567 | .543 | 315 | |||||
| *F.I.M.
(FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY
BETWEEN GROOVE AND SHAFT. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. ***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. **CALL FOR INFORMATION:1-800-557-6867 |
 back to Rotor Clip Retaining Rings
index chart |
|||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
