Retaining rings, Snap ring pliers, Retaining ring applicator, Snap ring applicator

rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEAR. DIA. î THRUST LD. (lbs.) Sqr. corner abutment

Diameter Diameter Width Depth Free
Diameter Thickness
*** Weight Per 1000 Pcs. Expanded over shaft Released in groove

Ring Safety factor of 4 Groove Safety factor of 2

Ds
DEC Ds
FRACT Ds
mm

Dg Tol. W Tol. d Df Tol. T Tol. lbs. L1 L2 Pr Pg

SHI-50 .500 1/2 12.7 .468 ±.002
.004* .039 +.003
-.000 .016 .461 +.005
-.010 .035 ±.002 1.0 .67 .645 1117 280

SHI-56 .562 9/16 14.3 .530 .039 .016 .521 .035 1.4 .75 .72 1269 320

SHI-59 .594 19/32 15.1 .559 ±.003
.004* .039 .017 .550 .035 1.6 .79 .76 1320 370

SHI-62 .625 5/8 15.9 .588 .039 .018 .579 .035 1.6 .83 .80 1421 400

SHI-68 .688 11/16 17.5 .646 .046 .021 .635 .042 2.5 .91 .87 2335 500

SHI-75 .750 3/4 19.0 .704 .046 .023 .693 .042 2.8 .99 .95 2538 600

SHI-78 .781 25/32 19.8 .733 .046 .024 .722 .042 3.1 1.04 1.00 2639 650

SHI-81 .812 13/16 20.6 .762 .046 .025 .751 .042 3.3 1.08 1.03 2690 700

SHI-87 .875 7/8 22.2 .821 .046 .027 .810 .042 3.8 1.15 1.10 2893 850

SHI-93 .938 15/16 23.8 .882 .046 .028 .867 .042 4.5 1.23 1.18 3147 900

SHI-100 .984 63/64 25.0 .926 .046 .029 .925 .042 4.8 1.30 1.25 3350 1000

SHI-100 1.000 1 25.4 .940 .046 .030 .925 .042 4.8 1.31 1.26 3350 1050

SHI-106 1.062 1-1/16 27.0 .998 ±.004
.005* .056 +.004
-.000 .032 .982 +.010
-.015 .050 6.2 1.38 1.32 4212 1200

SHI-112 1.125 1-1/8 28.6 1.059 .056 .033 1.041 .050 6.7 1.45 1.39 4466 1300

SHI-118 1.188 1-3/16 30.2 1.118 .056 .035 1.098 .050 7.2 1.52 1.46 4720 1450

SHI-125 1.250 1-1/4 31.7 1.176 .056 .037 1.156 .050 7.6 1.59 1.52 4974 1600

SHI-131 1.312 1-5/16 33.3 1.232 .056 .040 1.214 .050 8.2 1.66 1.58 5227 1850

SHI-137 1.375 1-3/8 34.9 1.291 .056 .042 1.272 .050 8.4 1.73 1.65 5481 2050

SHI-143 1.438 1-7/16 36.5 1.350 .056 .044 1.333 .050 9.1 1.80 1.72 5735 2200

SHI-150 1.500 1-1/2 38.1 1.406 .056 .047 1.387 .050 9.8 1.87 1.78 5938 2500

SHI-156 1.562 1-9/16 39.7 1.468 ±.005
.005* .068 .047 1.446 +.013
-.020 .062 ±.003 12.9 1.95 1.86 7714 2600

SHI-162 1.625 1-5/8 41.3 1.529 .068 .048 1.503 .062 13.4 2.02 1.93 8019 2750

SHI-177 1.750 1-3/4 44.4 1.650 .068 .050 1.637 .062 16.1 2.18 2.08 8628 3100

SHI-177 1.772 - 45.0 1.669 .068 .051 1.637 .062 16.1 2.20 2.10 8628 3200

SHI-181 1.812 1-13/16 46.0 1.708 .068 .052 1.675 .062 17.3 2.24 2.14 8983 3300

SHI-196 1.969 1-31/32 50.0 1.857 .068 .056 1.819 .062 20.5 2.43 2.32 9693 3900

SHI-200 2.000 2 50.8 1.886 .068 .057 1.850 .062 20.7 2.47 2.36 9896 4000

SHI-215 2.125 2-1/8 54.0 2.003 ±.006
.006* .086 +.005
-.000 .061 1.993 +.015
-.025 .078 30.0 2.62 2.50 13195 4550

SHI-215 2.156 2-5/32 54.8 2.032 .086 .062 1.993 .078 30.0 2.65 2.53 13195 4700

SHI-250 2.500 2-1/2 63.5 2.360 .086 .070 2.313 .078 43.5 3.05 2.92 15530 6200

SHI-275 2.750 2-3/4 69.8 2.602 .103 .074 2.543 +.020
-.030 .093 57.9 3.34 3.20 20402 7200

SHI-287 2.875 2-7/8 73.0 2.721 .103 .077 2.659 .093 64.5 3.49 3.34 21315 7800

SHI-315 3.156 3-5/32 80.2 2.986 .103 .085 2.920 .093 77.0 3.82 3.66 23447 9400

SHI-325 3.250 3-1/4 82.5 3.076 .103 .087 3.006 .093 77.5 3.93 3.76 24056 10000

SHI-350 3.500 3-1/2 88.9 3.316 .120 .092 3.237 .109 107.0 4.22 4.04 30349 11500

SHI-393 3.938 3-15/16 100.0 3.734 .120 .102 3.642 .109 123.0 4.71 4.51 34206 14000

* F.I.M. (FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM RING THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.

back to Constant Section Rings index

Visa & MasterCard - Same Day Shipping
same day shipping
Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955
sales@prospectfastener.com

A4092 ISO9001:2000

Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map

RING NO.	SHAFT			GROOVE SIZE					RING SIZE & WEIGHT					CLEAR. DIA.		î THRUST LD. (lbs.) Sqr. corner abutment
	Diameter			Diameter		Width		Depth	Free Diameter		Thickness ***		Weight Per 1000 Pcs.	Expanded over shaft	Released in groove	î THRUST LD. (lbs.) Sqr. corner abutment
																Ring Safety factor of 4	Groove Safety factor of 2


	Ds DEC	Ds FRACT	Ds mm
	Ds DEC	Ds FRACT	Ds mm	Dg	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	lbs.	L1	L2	Pr	Pg
SHI-50	.500	1/2	12.7	.468	±.002 .004*	.039	+.003 -.000	.016	.461	+.005 -.010	.035	±.002	1.0	.67	.645	1117	280
SHI-56	.562	9/16	14.3	.530	±.002 .004*	.039		.016	.521		.035		1.4	.75	.72	1269	320
SHI-59	.594	19/32	15.1	.559	±.003 .004*	.039		.017	.550		.035		1.6	.79	.76	1320	370
SHI-62	.625	5/8	15.9	.588		.039		.018	.579		.035		1.6	.83	.80	1421	400
SHI-68	.688	11/16	17.5	.646		.046		.021	.635		.042		2.5	.91	.87	2335	500
SHI-75	.750	3/4	19.0	.704		.046		.023	.693		.042		2.8	.99	.95	2538	600
SHI-78	.781	25/32	19.8	.733		.046		.024	.722		.042		3.1	1.04	1.00	2639	650
SHI-81	.812	13/16	20.6	.762		.046		.025	.751		.042		3.3	1.08	1.03	2690	700
SHI-87	.875	7/8	22.2	.821		.046		.027	.810		.042		3.8	1.15	1.10	2893	850
SHI-93	.938	15/16	23.8	.882		.046		.028	.867		.042		4.5	1.23	1.18	3147	900
SHI-100	.984	63/64	25.0	.926		.046		.029	.925		.042		4.8	1.30	1.25	3350	1000
SHI-100	1.000	1	25.4	.940		.046		.030	.925		.042		4.8	1.31	1.26	3350	1050
SHI-106	1.062	1-1/16	27.0	.998	±.004 .005*	.056	+.004 -.000	.032	.982	+.010 -.015	.050		6.2	1.38	1.32	4212	1200
SHI-112	1.125	1-1/8	28.6	1.059		.056		.033	1.041		.050		6.7	1.45	1.39	4466	1300
SHI-118	1.188	1-3/16	30.2	1.118		.056		.035	1.098		.050		7.2	1.52	1.46	4720	1450
SHI-125	1.250	1-1/4	31.7	1.176		.056		.037	1.156		.050		7.6	1.59	1.52	4974	1600
SHI-131	1.312	1-5/16	33.3	1.232		.056		.040	1.214		.050		8.2	1.66	1.58	5227	1850
SHI-137	1.375	1-3/8	34.9	1.291		.056		.042	1.272		.050		8.4	1.73	1.65	5481	2050
SHI-143	1.438	1-7/16	36.5	1.350		.056		.044	1.333		.050		9.1	1.80	1.72	5735	2200
SHI-150	1.500	1-1/2	38.1	1.406		.056		.047	1.387		.050		9.8	1.87	1.78	5938	2500
SHI-156	1.562	1-9/16	39.7	1.468	±.005 .005*	.068		.047	1.446	+.013 -.020	.062	±.003	12.9	1.95	1.86	7714	2600
SHI-162	1.625	1-5/8	41.3	1.529		.068		.048	1.503		.062		13.4	2.02	1.93	8019	2750
SHI-177	1.750	1-3/4	44.4	1.650		.068		.050	1.637		.062		16.1	2.18	2.08	8628	3100
SHI-177	1.772	-	45.0	1.669		.068		.051	1.637		.062		16.1	2.20	2.10	8628	3200
SHI-181	1.812	1-13/16	46.0	1.708		.068		.052	1.675		.062		17.3	2.24	2.14	8983	3300
SHI-196	1.969	1-31/32	50.0	1.857		.068		.056	1.819		.062		20.5	2.43	2.32	9693	3900
SHI-200	2.000	2	50.8	1.886		.068		.057	1.850		.062		20.7	2.47	2.36	9896	4000
SHI-215	2.125	2-1/8	54.0	2.003	±.006 .006*	.086	+.005 -.000	.061	1.993	+.015 -.025	.078		30.0	2.62	2.50	13195	4550
SHI-215	2.156	2-5/32	54.8	2.032		.086		.062	1.993		.078		30.0	2.65	2.53	13195	4700
SHI-250	2.500	2-1/2	63.5	2.360		.086		.070	2.313		.078		43.5	3.05	2.92	15530	6200
SHI-275	2.750	2-3/4	69.8	2.602		.103		.074	2.543	+.020 -.030	.093		57.9	3.34	3.20	20402	7200
SHI-287	2.875	2-7/8	73.0	2.721		.103		.077	2.659		.093		64.5	3.49	3.34	21315	7800
SHI-315	3.156	3-5/32	80.2	2.986		.103		.085	2.920		.093		77.0	3.82	3.66	23447	9400
SHI-325	3.250	3-1/4	82.5	3.076		.103		.087	3.006		.093		77.5	3.93	3.76	24056	10000
SHI-350	3.500	3-1/2	88.9	3.316		.120		.092	3.237		.109		107.0	4.22	4.04	30349	11500
SHI-393	3.938	3-15/16	100.0	3.734		.120		.102	3.642		.109		123.0	4.71	4.51	34206	14000