| RING NO. | SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | CLEAR. | î THRUST LD.(lbs.) Sqr. corner abutment | ||||||||||||
| DIAMETER | DIAMETER | WIDTH | DEPTH | FREE DIAMETER |
THICKNESS *** |
Weight Per 1000 Pcs. | Released over shaft | ||||||||||
| Allowable load (lbs.) | Groove Safety factor of 2 | ||||||||||||||||
| Ds DEC |
. | ||||||||||||||||
| Ds FRACT |
Ds mm |
Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lbs. | L2 | Pr | ||||
| FROM | TO | Pg | |||||||||||||||
| SHF-6 | .058 | .060 | - | 1.5 | not recommended for use with grooves | .055 | +.002 -.003 |
.015 | ±.002 | .030 | .21 | 5 | not recommended for use with grooves | ||||
| SHF-7 | .078 | .080 | 5/64 | 2.0 | .074 | .025 | .08 | .24 | 8 | ||||||||
| SHF-9 | .092 | .096 | 3/32 | 2.4 | .089 | .025 | .10 | .26 | 8 | ||||||||
| SHF-12 | .123 | .127 | 1/8 | 3.2 | .120 | .025 | .24 | .33 | 10 | ||||||||
| SHF-15 | .154 | .158 | 5/32 | 4.0 | .150 | +.002 -.004 |
.025 | .30 | .36 | 12 | |||||||
| SHF-18 | .185 | .189 | 3/16 | 4.8 | .181 | .035 | ±.003 | .55 | .44 | 20 | |||||||
| SHF-19 | .195 | .199 | - | 5.0 | .187 | ±.003 | .032 | .45 | .43 | 30 | |||||||
| SHF-23 | .234 | .238 | 15/64 | 6.0 | .228 | +.0005 -.0015 |
.041 | +.003 -.000 |
.004 | .224 | .035 | .76 | .48 | 22 | 70 | ||
| SHF-25 | .248 | .252 | 1/4 | 6.3 | .240 | .041 | .005 | .238 | +.002-.004 | .035 | .74 | .49 | 23 | 90 | |||
| SHF-31 | .310 | .316 | 5/16 | 7.9 | .303 | .048 | .005 | .298 | +.003 -.005 |
.042 | 1.39 | .68 | 25 | 110 | |||
| SHF-37 | .373 | .379 | 3/8 | 9.5 | .361 | +.001 -.002 |
.048 | . +.004 -.000 |
.007 | .354 | .042 | 1.72 | .74 | 31 | 180 | ||
| SHF-43 | .434 | .440 | 7/16 | 11.0 | .419 | .056 | .009 | .412 | .050 | 2.61 | .81 | 41 | 290 | ||||
| SHF-50 | .497 | .503 | 1/2 | 12.7 | .478 | .056 | .011 | .470 | +.004 -.006 |
.050 | 2.91 | .90 | 46 | 390 | |||
| SHF-62 | .622 | .628 | 5/8 | 15.9 | .599 | .069 | .013 | .593 | .062 | ±.004 | 5.70 | 1.06 | 61 | 570 | |||
| SHF-75 | .745 | .755 | 3/4 | 19.0 | .718 | +.002-.003 | .069 | .016 | .706 | .062 | 6.88 | 1.32 | 66 | 850 | |||
| î
VALUES SHOWN APPLY TO RINGS INSTALLED ON A SHAFT MADE OF LOW
CARBON STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. ***FOR PLATED RINGS, ADD.002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS ( WHEN USED IN GROOVE) WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
 back to Constant Section Rings index |
|||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
