| RING NO. | SHAFT | GROOVE SIZE | FREE DIAMETER |
THICKNESS *** |
Weight Per 1000 pcs. | CLEARANCE DIA. | î THRUST LD.(lbs.) Sqr. Corner Abutment | ||||||||||
| DIAMETER | DIAMETER | WIDTH | DEPTH | Expanded over Shaft | Released in Groove | ||||||||||||
| Ring Safety Factor of 4 | Groove Safety Factor of 2 | ||||||||||||||||
| Ds DEC |
Ds FRAC |
Ds mm |
|||||||||||||||
| Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lbs. | L1 | L2 | Pr | Pg | ||||
| SH-354 | 3.543 | - | 90.0 | 3.357 | ±.006 .006* |
.120 | +.005 -.000 |
.093 |
3.277 |
+.020 -.030 | .109 | ±.003 | 73.0 | 4.29 | 4.11 | 46183 | 23300 |
| SH-362 | 3.625 | 3-5/8 | 92.1 | 3.435 | .120 | .095 |
3.352 |
.109 | 76.0 | 4.37 | 4.18 | 47299 | 24300 | ||||
| SH-368 | 3.688 | 3-11/16 | 93.7 | 3.493 | .120 | .097 |
3.410 |
.109 | 80.0 | 4.43 | 4.24 | 48010 | 25300 | ||||
| SH-375 | 3.750 | 3-3/4 | 95.2 | 3.552 | .120 | .099 |
3.468 |
.109 | 83.0 | 4.50 | 4.31 | 48822 | 26200 | ||||
| SH-387 | 3.875 | 3-7/8 | 98.40 | 3.673 | .120 | .101 |
3.584 |
.109 | 88.0 | 4.60 | 4.40 | 50446 | 27700 | ||||
| SH-393 | 3.938 | 3-15/16 | 100.0 | 3.734 | .120 | .102 |
3.642 |
.109 | 95.0 | 4.70 | 4.50 | 51359 | 28400 | ||||
| SH-400 | 4.000 | 4 | 101.6 | 3.792 | .120 | .104 |
3.700 |
.109 | 101.0 | 4.78 | 4.58 | 52171 | 29400 | ||||
| SH-425 | 4.250 | 4-1/4 | 108.0 | 4.065 | .120 | .092 |
3.989 |
.109 | 112.0 | 5.09 | 4.91 | 55419 | 27600 | ||||
| SH-437 | 4.375 | 4-3/8 | 111.1 | 4.190 | .120 | .092 |
4.106 |
.109 | 115.0 | 5.22 | 5.04 | 57043 | 28400 | ||||
| SH-450 | 4.500 | 4-1/2 | 114.3 | 4.310 | .120 | .095 |
4.223 |
.109 | 132.0 | 5.37 | 5.18 | 58667 | 30200 | ||||
| SH-475 | 4.750 | 4-3/4 | 120.6 | 4.550 | .120 | .100 |
4.458 |
.109 | 113.0 | 5.67 | 5.47 | 61915 | 33600 | ||||
| SH-500 | 5.000 | 5 | 127.0 | 4.790 | .120 | .105 |
4.692 |
.109 | 149.0 | 5.96 | 5.75 | 65163 | 37100 | ||||
| SH-525 | 5.250 | 5-1/4 | 133.3 | 5.030 | ±.007 .006* |
.139 | +.006 -.000 |
.110 |
4.927 |
+.020 -.040 | .125 | . ±.004 |
190.0 | 6.27 | 6.05 | 78460 | 40800 |
| SH-550 | 5.500 | 5-1/2 | 139.7 | 5.265 | .139 | .117 |
5.162 |
.125 | 202.5 | 6.57 | 6.34 | 82215 | 45500 | ||||
| SH-575 | 5.750 | 5-3/4 | 146.0 | 5.505 | .139 | .122 |
5.396 |
.125 | 220.0 | 6.86 | 6.62 | 85971 | 49600 | ||||
| SH-600 | 6.000 | 6 | 152.4 | 5.745 | .139 | .127 |
5.631 |
.125 | 210.0 | 7.16 | 6.91 | 89625 | 53800 | ||||
| SH-625 | 6.250 | 6-1/4 | 158.7 | 5.985 | ±.008 -.006* |
.174 | +.008 -.000 |
.132 |
5.866 |
+.020 -.050 | .156 | ±.005 | 282.0 | 7.46 | 7.20 | 116522 | 58300 |
| SH-650 | 6.500 | 6-1/2 | 165.1 | 6.225 | .174 | .137 |
6.100 |
.156 | 330.0 | 7.87 | 7.60 | 121191 | 62900 | ||||
| SH-675 | 6.750 | 6-3/4 | 171.4 | 6.465 | .174 | .142 |
6.335 |
.156 | 356.0 | 8.06 | 7.78 | 125860 | 67700 | ||||
| SH-700 | 7.000 | 7 | 177.8 | 6.705 | .174 | .147 |
6.570 |
+.050 -.130 | .156 | 371.0 | 8.15 | 8.07 | 130529 | 72700 | |||
| SH-725 | 7.250 | 7-1/4 | 184.2 | 6.942 | .209 | .154 |
6.775 |
.187 | 510.0 | 7.85 | 8.39 | 162096 | 78900 | ||||
| SH-750 | 7.500 | 7-1/2 | 190.5 | 7.180 | .209 | .160 |
7.009 |
.187 | 534.0 | 8.96 | 8.64 | 167678 | 84800 | ||||
| SH-775 | 7.750 | 7-3/4 | 196.9 | 7.420 | .209 | .165 |
7.243 |
.187 | 545.0 | 9.20 | 8.87 | 173261 | 90450 | ||||
| SH-800 | 8.000 | 8 | 203.2 | 7.660 | .209 | .170 |
7.478 |
.187 | 640.0 | 9.60 | 9.26 | 178843 | 96100 | ||||
| SH-825 | 8.250 | 8-1/4 | 209.6 | 7.900 | .209 | .175 |
7.712 |
.187 | 665.0 | 9.85 | 9.50 | 184426 | 102100 | ||||
| SH-850 | 8.500 | 8-1/2 | 215.9 | 8.140 | .209 | .180 |
7.947 |
.187 | 692.0 | 10.10 | 9.74 | 190008 | 108100 | ||||
| SH-875 | 8.750 | 8-3/4 | 222.3 | 8.380 | .209 | .185 |
8.181 |
.187 | 712.0 | 10.40 | 10.00 | 195591 | 114450 | ||||
| SH-900 | 9.000 | 9 | 228.6 | 8.620 | .209 | .190 |
8.415 |
.187 | 737.0 | 10.60 | 10.22 | 201173 | 120800 | ||||
| SH-925 | 9.250 | 9-1/4 | 234.9 | 8.860 | .209 | .195 |
8.650 |
.187 | 760.0 | 10.85 | 10.50 | 206756 | 128225 | ||||
| SH-950 | 9.500 | 9-1/2 | 241.3 | 9.100 | .209 | .200 |
8.885 |
.187 | 785.0 | 11.10 | 10.70 | 212338 | 134200 | ||||
| SH-975 | 9.750 | 9-3/4 | 247.6 | 9.338 | .209 | .206 |
9.120 |
.187 | 845.0 | 11.35 | 10.95 | 217921 | 142000 | ||||
| SH-1000 | 10.000 | 10 | 254.0 | 9.575 | .209 | .212 |
9.355 |
.187 | 910.0 | 11.60 | 11.20 | 223503 | 149800 | ||||
| *
F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION
OF CONCENTRICITY BETWEEN GROOVE & SHAFT. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. ***FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
 backback to Rotor Clip Retaining Rings
index chart |
|||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
