rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEARANCE DIA. î THRUST LD.(lbs.) Sqr. corner abutment

DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER THICKNESS
*** Weight Per 1000 pcs. Expanded over Shaft Released in Groove

Ring Safety Factor of 4 Groove Safety Factor of 2

Ds
DEC Ds
FRAC Ds
mm

Dg Tol. W Tol. d Df Tol. T Tol. lbs. L1 L2 Pr Pg

SH-118 1.188 1-3/16 30.2 1.118 .
±.004
.005* .056 +.004 -.000 .035 1.098 +.010
-.015 .050 .
±.002 5.6 1.61 1.54 7105 2950

SH-125 1.250 1-1/4 31.7 1.176 .056 .037 1.156 .050 5.9 1.69 1.62 7460 3250

SH-131 1.312 1-5/16 33.3 1.232 .056 .040 1.214 .050 6.8 1.75 1.67 7866 3700

SH-137 1.375 1-3/8 34.9 1.291 .056 .042 1.272 .050 7.2 1.80 1.72 8222 4100

SH-143 1.438 1-7/16 36.5 1.350 .056 .044 1.333 .050 8.1 1.87 1.79 8628 4500

SH-150 1.500 1-1/2 38.1 1.406 .056 .047 1.387 .050 9.0 1.99 1.90 8932 5000

SH-156 1.562 1-9/16 39.7 1.468 ±.005
.005* .068 .047 1.446 +.013
-.020 .062 ±.003 12.4 2.10 2.01 11571 5200

SH-162 1.625 1-5/8 41.3 1.529 .068 .048 1.503 .062 13.2 2.17 2.08 12028 5500

SH-168 1.688 1-11/16 42.9 1.589 .068 .049 1.560 .062 14.8 2.24 2.15 12535 5850

SH-175 1.750 1-3/4 44.4 1.650 .068 .050 1.618 .062 15.3 2.31 2.21 12992 6200

SH-177 1.772 - 45.0 1.669 .068 .051 1.637 .062 15.4 2.33 2.23 13144 6400

SH-181 1.812 1-13/16 46.0 1.708 .068 .052 1.675 .062 16.2 2.38 2.28 13449 6650

SH-187 1.875 1-7/8 47.6 1.769 .068 .053 1.735 .062 17.3 2.44 2.34 13906 7000

SH-196 1.969 1-31/32 50.0 1.857 .068 .056 1.819 .062 18.0 2.54 2.43 14565 7800

SH-200 2.000 2 50.8 1.886 .068 .057 1.850 .062 19.0 2.55 2.44 14819 8050

SH-206 2.062 2-1/16 52.4 1.946 ±.006
.006* .086 +.005
-.000 .058 1.906 +.015
-.025 .078 25.0 2.68 2.57 19234 8450

SH-212 2.125 2-1/8 54.0 2.003 .086 .061 1.964 .078 26.1 2.75 2.63 19793 9150

SH-215 2.156 2-5/32 54.8 2.032 .086 .062 1.993 .078 26.3 2.78 2.66 20097 9450

SH-225 2.250 2-1/4 57.1 2.120 .086 .065 2.081 .078 27.7 2.87 2.74 21011 10350

SH-231 2.312 2-5/16 58.7 2.178 .086 .067 2.139 .078 28.0 2.94 2.81 21518 10950

SH-237 2.375 2-3/8 60.3 2.239 .086 .068 2.197 .078 29.2 3.01 2.88 22127 11400

SH-243 2.438 2-7/16 61.9 2.299 .086 .069 2.255 .078 29.5 3.07 2.94 22736 11900

SH-250 2.500 2-1/2 63.5 2.360 .086 .070 2.313 .078 29.7 3.12 2.98 23345 12350

SH-255 2.559 - 65.0 2.419 .086 .070 2.377 +.020
-.030 .078 33.9 3.18 3.04 23853 12650

SH-262 2.625 2-5/8 66.7 2.481 .086 .072 2.428 .078 35.0 3.25 3.11 24462 13350

SH-268 2.688 2-11/16 68.3 2.541 .086 .073 2.485 .078 36.0 3.32 3.18 25071 13850

SH-275 2.750 2-3/4 69.8 2.602 .103 .074 2.543 .093 42.5 3.45 3.31 30551 14400

SH-287 2.875 2-7/8 73.0 2.721 .103 .077 2.659 .093 48.5 3.57 3.42 31973 15650

SH-293 2.938 2-15/16 74.6 2.779 .103 .079 2.717 .093 50.0 3.64 3.49 32683 16400

SH-300 3.000 3 76.2 2.838 .103 .081 2.775 .093 52.0 3.69 3.53 33394 17200

SH-306 3.062 3-1/16 77.8 2.898 .103 .082 2.832 .093 47.5 3.74 3.58 34003 17750

SH-312 3.125 3-1/8 79.4 2.957 .103 .084 2.892 .093 58.0 3.82 3.66 34815 18550

SH-315 3.156 3-5/32 80.2 2.986
.103
.085 2.920 .093 59.0 3.85 3.68 35119 18950

SH-325 3.250 3-1/4 82.5 3.076
.103
.087 3.006 .093 62.0 3.95 3.78 36134 20000

SH-334 3.346 3-11/32 85.0 3.166
.103
.090 3.092 .093 64.0 4.04 3.87 37251 21000

SH-343 3.438 3-7/16 87.3 3.257
.103
.090 3.179 .093 66.0 4.14 3.96 38266 21900

SH-350 3.500 3-1/2 88.9 3.316
.120
.092 3.237 .109 72.0 4.25 4.07 45574 22800

* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE & SHAFT.
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
***FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.

back | more
back to Rotor Clip Retaining Rings index chart

Visa & MasterCard - Same Day Shipping
same day shipping
Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955
sales@prospectfastener.com

A4092 ISO9001:2000

Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map

RING NO.	SHAFT			GROOVE SIZE					RING SIZE & WEIGHT					CLEARANCE DIA.		î THRUST LD.(lbs.) Sqr. corner abutment
	DIAMETER			DIAMETER		WIDTH		DEPTH	FREE DIAMETER		THICKNESS ***		Weight Per 1000 pcs.	Expanded over Shaft	Released in Groove	î THRUST LD.(lbs.) Sqr. corner abutment
																Ring Safety Factor of 4	Groove Safety Factor of 2


	Ds DEC	Ds FRAC	Ds mm
	Ds DEC	Ds FRAC	Ds mm	Dg	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	lbs.	L1	L2	Pr	Pg
SH-118	1.188	1-3/16	30.2	1.118	. ±.004 .005*	.056	+.004 -.000	.035	1.098	+.010 -.015	.050	. ±.002	5.6	1.61	1.54	7105	2950
SH-125	1.250	1-1/4	31.7	1.176		.056		.037	1.156		.050		5.9	1.69	1.62	7460	3250
SH-131	1.312	1-5/16	33.3	1.232		.056		.040	1.214		.050		6.8	1.75	1.67	7866	3700
SH-137	1.375	1-3/8	34.9	1.291		.056		.042	1.272		.050		7.2	1.80	1.72	8222	4100
SH-143	1.438	1-7/16	36.5	1.350		.056		.044	1.333		.050		8.1	1.87	1.79	8628	4500
SH-150	1.500	1-1/2	38.1	1.406		.056		.047	1.387		.050		9.0	1.99	1.90	8932	5000
SH-156	1.562	1-9/16	39.7	1.468	±.005 .005*	.068		.047	1.446	+.013 -.020	.062	±.003	12.4	2.10	2.01	11571	5200
SH-162	1.625	1-5/8	41.3	1.529		.068		.048	1.503		.062		13.2	2.17	2.08	12028	5500
SH-168	1.688	1-11/16	42.9	1.589		.068		.049	1.560		.062		14.8	2.24	2.15	12535	5850
SH-175	1.750	1-3/4	44.4	1.650		.068		.050	1.618		.062		15.3	2.31	2.21	12992	6200
SH-177	1.772	-	45.0	1.669		.068		.051	1.637		.062		15.4	2.33	2.23	13144	6400
SH-181	1.812	1-13/16	46.0	1.708		.068		.052	1.675		.062		16.2	2.38	2.28	13449	6650
SH-187	1.875	1-7/8	47.6	1.769		.068		.053	1.735		.062		17.3	2.44	2.34	13906	7000
SH-196	1.969	1-31/32	50.0	1.857		.068		.056	1.819		.062		18.0	2.54	2.43	14565	7800
SH-200	2.000	2	50.8	1.886		.068		.057	1.850		.062		19.0	2.55	2.44	14819	8050
SH-206	2.062	2-1/16	52.4	1.946	±.006 .006*	.086	+.005 -.000	.058	1.906	+.015 -.025	.078		25.0	2.68	2.57	19234	8450
SH-212	2.125	2-1/8	54.0	2.003		.086		.061	1.964		.078		26.1	2.75	2.63	19793	9150
SH-215	2.156	2-5/32	54.8	2.032		.086		.062	1.993		.078		26.3	2.78	2.66	20097	9450
SH-225	2.250	2-1/4	57.1	2.120		.086		.065	2.081		.078		27.7	2.87	2.74	21011	10350
SH-231	2.312	2-5/16	58.7	2.178		.086		.067	2.139		.078		28.0	2.94	2.81	21518	10950
SH-237	2.375	2-3/8	60.3	2.239		.086		.068	2.197		.078		29.2	3.01	2.88	22127	11400
SH-243	2.438	2-7/16	61.9	2.299		.086		.069	2.255		.078		29.5	3.07	2.94	22736	11900
SH-250	2.500	2-1/2	63.5	2.360		.086		.070	2.313		.078		29.7	3.12	2.98	23345	12350
SH-255	2.559	-	65.0	2.419		.086		.070	2.377	+.020 -.030	.078		33.9	3.18	3.04	23853	12650
SH-262	2.625	2-5/8	66.7	2.481		.086		.072	2.428		.078		35.0	3.25	3.11	24462	13350
SH-268	2.688	2-11/16	68.3	2.541		.086		.073	2.485		.078		36.0	3.32	3.18	25071	13850
SH-275	2.750	2-3/4	69.8	2.602		.103		.074	2.543		.093		42.5	3.45	3.31	30551	14400
SH-287	2.875	2-7/8	73.0	2.721		.103		.077	2.659		.093		48.5	3.57	3.42	31973	15650
SH-293	2.938	2-15/16	74.6	2.779		.103		.079	2.717		.093		50.0	3.64	3.49	32683	16400
SH-300	3.000	3	76.2	2.838		.103		.081	2.775		.093		52.0	3.69	3.53	33394	17200
SH-306	3.062	3-1/16	77.8	2.898		.103		.082	2.832		.093		47.5	3.74	3.58	34003	17750
SH-312	3.125	3-1/8	79.4	2.957		.103		.084	2.892		.093		58.0	3.82	3.66	34815	18550
SH-315	3.156	3-5/32	80.2	2.986		.103		.085	2.920		.093		59.0	3.85	3.68	35119	18950
SH-325	3.250	3-1/4	82.5	3.076		.103		.087	3.006		.093		62.0	3.95	3.78	36134	20000
SH-334	3.346	3-11/32	85.0	3.166		.103		.090	3.092		.093		64.0	4.04	3.87	37251	21000
SH-343	3.438	3-7/16	87.3	3.257		.103		.090	3.179		.093		66.0	4.14	3.96	38266	21900
SH-350	3.500	3-1/2	88.9	3.316		.120		.092	3.237		.109		72.0	4.25	4.07	45574	22800