Cable clamps | Snap rings | Retaining rings | Roll pins

rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEARANCE DIA. î THRUST LD.(lbs.) Sqr. corner abutment

DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER THICKNESS
*** Weight. Per 1000 pcs. Expanded over Shaft Released in Groove

Ring Safety Factor of 4 Groove Safety Factor of 2

Ds
DEC Ds
FRAC Ds
mm

Dg Tol. W Tol. d Df Tol. T Tol. lbs. L1 L2 Pr Pg

**SH-12 .125 1/8 3.2 .117 ±.0015
.0015* .012 +.002
-.000 .004 .112 +.002
-.004 .010 ±.001 .018 .222 .214 112 35

**SH-15 .156 5/32 4.0 .146 .012 .005 .142 .010 .037 .270 .260 132 55

**SH-18 .188 3/16 4.8 .175 .018 .006 .168 .015 ±.002 .059 .298 .286 244 80

**SH-19 .197 - 5.0 .185 .018 .006 .179 .015 .063 .319 .307 254 85

**SH-21 .219 7/32 5.6 .205 .018 .007 .196 .015 .074 .338 .324 284 110

**SH-23 .236 15/64 6.0 .222 .018 .007 .215 .015 .086 .355 .341 315 120

SH-25 .250 1/4 6.4 .230 .029 +.003
-.000 .010 .225 .025 .21 .45 .43 599 175

SH-27 .276 - 7.0 .255 ±.002
.002* .029 .010 .250 +.002
-.005 .025 .23 .48 .46 660 195

SH-28 .281 9/32 7.1 .261 .029 .010 .256 .025 .24 .49 .47 670 200

SH-31 .312 5/16 7.9 .290 .029 .011 .281 .025 .27 .54 .52 751 240

SH-34 .344 11/32 8.7 .321 .029 .011 .309 .025 .31 .57 .55 812 265

SH-35 .354 - 9.0 .330 .029 .012 .320 .025 .35 .59 .57 832 300

SH-37 .375 3/8 9.5 .352 .029 .012 .338 .025 .39 .61 .59 883 320

SH-39 .394 - 10.0 .369 .029 .012 .354 .025 .42 .62 .60 954 335

SH-40 .406 13/32 10.3 .382 .029 .012 .366 .025 .43 .63 .61 964 350

SH-43 .438 7/16 11.1 .412 .029 .013 .395 .025 .50 .66 .64 1035 400

SH-46SP1 .461 - 11.7 .435 .029 .013 .420 .025 .51 .68 .66 1110 460

SH-46 .469 15/32 11.9 .443 .029 .013 .428 .025 .54 .68 .66 1117 450

SH-50 .500 1/2 12.7 .468 ±.002
.004* .039 .016 .461 .035 .91 .77 .74 1675 550

SH-55 .551 - 14.0 .519 .039 .016 .509 +.005
-.010 .035 .90 .81 .78 1800 600

SH-56 .562 9/16 14.3 .530 .039 .016 .521 .035 1.1 .82 .79 1878 650

SH-59 .594 19/32 15.1 .559 ±.003
.004* .039 .017 .550 .035 1.2 .86 .83 1979 750

SH-62 .625 5/8 15.9 .588 .039 .018 .579 .035 1.3 .90 .87 2091 800

SH-66 .669 - 17.0 .629 .039 .020 .621 .035 1.4 .93 .89 2233 950

SH-66 .672 43/64 17.1 .631 .039 .020 .621 .035 1.4 .93 .89 2233 950

SH-68 .688 11/16 17.5 .646 .046 .021 .635 .042 1.8 1.01 .97 3451 1000

SH-75 .750 3/4 19.0 .704 .046 .023 .693 .042 2.1 1.09 1.05 3756 1200

SH-78 .781 25/32 19.8 .733 .046 .024 .722 .042 2.2 1.12 1.08 3959 1300

SH-81 .812 13/16 20.6 .762 .046 .025 .751 .042 2.5 1.15 1.10 4060 1450

SH-84 .844 - 21.4 .791 .046 .026 .780 .042 2.7 1.18 1.13 4200 1500

SH-87 .875 7/8 22.2 .821 .046 .027 .810 .042 2.8 1.21 1.16 4365 1650

SH-93 .938 15/16 23.8 .882 .046 .028 .867 .042 3.1 1.34 1.29 4720 1850

SH-98 .984 63/64 25.0 .926 .046 .029 .910 .042 3.5 1.39 1.34 4923 2000

SH-100 1.000 1 25.4 .940 .046 .030 .925 .042 3.6 1.41 1.35 5024 2100

SH-102 1.023 - 26.0 .961 .046 .031 .946 .042 3.9 1.43 1.37 5126 2250

SH-106 1.062 1-1/16 27.0 .998 ±.004
.005* .056 +.004
-.000 .032 .982 +.010
-.015 .050 4.8 1.50 1.44 6293 2400

SH-112 1.125 1-1/8 28.6 1.059 .056 .033 1.041 .050 5.1 1.55 1.49 6699 2600

**SIZES -12 THRU -23 AVAILABLE IN BERYLLIUM COPPER ONLY.
* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE & SHAFT.
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
***FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.

more
back to Rotor Clip Retaining Rings index chart

Visa & MasterCard - Same Day Shipping
same day shipping
Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955
sales@prospectfastener.com

A4092 ISO9001:2000

Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map

RING NO.	SHAFT			GROOVE SIZE					RING SIZE & WEIGHT					CLEARANCE DIA.		î THRUST LD.(lbs.) Sqr. corner abutment
	DIAMETER			DIAMETER		WIDTH		DEPTH	FREE DIAMETER		THICKNESS ***		Weight. Per 1000 pcs.	Expanded over Shaft	Released in Groove	î THRUST LD.(lbs.) Sqr. corner abutment
																Ring Safety Factor of 4	Groove Safety Factor of 2


	Ds DEC	Ds FRAC	Ds mm
	Ds DEC	Ds FRAC	Ds mm	Dg	Tol.	W	Tol.	d	Df	Tol.	T	Tol.	lbs.	L1	L2	Pr	Pg
**SH-12	.125	1/8	3.2	.117	±.0015 .0015*	.012	+.002 -.000	.004	.112	+.002 -.004	.010	±.001	.018	.222	.214	112	35
**SH-15	.156	5/32	4.0	.146		.012		.005	.142		.010	±.001	.037	.270	.260	132	55
**SH-18	.188	3/16	4.8	.175		.018		.006	.168		.015	±.002	.059	.298	.286	244	80
**SH-19	.197	-	5.0	.185		.018		.006	.179		.015		.063	.319	.307	254	85
**SH-21	.219	7/32	5.6	.205		.018		.007	.196		.015		.074	.338	.324	284	110
**SH-23	.236	15/64	6.0	.222		.018		.007	.215		.015		.086	.355	.341	315	120
SH-25	.250	1/4	6.4	.230		.029	+.003 -.000	.010	.225		.025		.21	.45	.43	599	175
SH-27	.276	-	7.0	.255	±.002 .002*	.029		.010	.250	+.002 -.005	.025		.23	.48	.46	660	195
SH-28	.281	9/32	7.1	.261		.029		.010	.256		.025		.24	.49	.47	670	200
SH-31	.312	5/16	7.9	.290		.029		.011	.281		.025		.27	.54	.52	751	240
SH-34	.344	11/32	8.7	.321		.029		.011	.309		.025		.31	.57	.55	812	265
SH-35	.354	-	9.0	.330		.029		.012	.320		.025		.35	.59	.57	832	300
SH-37	.375	3/8	9.5	.352		.029		.012	.338		.025		.39	.61	.59	883	320
SH-39	.394	-	10.0	.369		.029		.012	.354		.025		.42	.62	.60	954	335
SH-40	.406	13/32	10.3	.382		.029		.012	.366		.025		.43	.63	.61	964	350
SH-43	.438	7/16	11.1	.412		.029		.013	.395		.025		.50	.66	.64	1035	400
SH-46SP1	.461	-	11.7	.435		.029		.013	.420		.025		.51	.68	.66	1110	460
SH-46	.469	15/32	11.9	.443		.029		.013	.428		.025		.54	.68	.66	1117	450
SH-50	.500	1/2	12.7	.468	±.002 .004*	.039		.016	.461		.035		.91	.77	.74	1675	550
SH-55	.551	-	14.0	.519		.039		.016	.509	+.005 -.010	.035		.90	.81	.78	1800	600
SH-56	.562	9/16	14.3	.530		.039		.016	.521		.035		1.1	.82	.79	1878	650
SH-59	.594	19/32	15.1	.559	±.003 .004*	.039		.017	.550		.035		1.2	.86	.83	1979	750
SH-62	.625	5/8	15.9	.588		.039		.018	.579		.035		1.3	.90	.87	2091	800
SH-66	.669	-	17.0	.629		.039		.020	.621		.035		1.4	.93	.89	2233	950
SH-66	.672	43/64	17.1	.631		.039		.020	.621		.035		1.4	.93	.89	2233	950
SH-68	.688	11/16	17.5	.646		.046		.021	.635		.042		1.8	1.01	.97	3451	1000
SH-75	.750	3/4	19.0	.704		.046		.023	.693		.042		2.1	1.09	1.05	3756	1200
SH-78	.781	25/32	19.8	.733		.046		.024	.722		.042		2.2	1.12	1.08	3959	1300
SH-81	.812	13/16	20.6	.762		.046		.025	.751		.042		2.5	1.15	1.10	4060	1450
SH-84	.844	-	21.4	.791		.046		.026	.780		.042		2.7	1.18	1.13	4200	1500
SH-87	.875	7/8	22.2	.821		.046		.027	.810		.042		2.8	1.21	1.16	4365	1650
SH-93	.938	15/16	23.8	.882		.046		.028	.867		.042		3.1	1.34	1.29	4720	1850
SH-98	.984	63/64	25.0	.926		.046		.029	.910		.042		3.5	1.39	1.34	4923	2000
SH-100	1.000	1	25.4	.940		.046		.030	.925		.042		3.6	1.41	1.35	5024	2100
SH-102	1.023	-	26.0	.961		.046		.031	.946		.042		3.9	1.43	1.37	5126	2250
SH-106	1.062	1-1/16	27.0	.998	±.004 .005*	.056	+.004 -.000	.032	.982	+.010 -.015	.050		4.8	1.50	1.44	6293	2400
SH-112	1.125	1-1/8	28.6	1.059	±.004 .005*	.056	+.004 -.000	.033	1.041	+.010 -.015	.050		5.1	1.55	1.49	6699	2600