rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT Clr. Dia. î THRUST LD. (lbs.) Sqr. Corner Abutment
DIAMETER DIAMETER WIDTH DEPTH FREE DIAMETER THICKNESS
***		 Weight Per 1000 Pcs. Installed in groove
Ring Safety factor of 2-1/2 Groove Safety factor of 2
Ds
DEC		 Ds
FRACT		 Ds
mm
Dg Tol. F.I.M* W Tol. d ref. Df Tol. T Tol. lbs. L2 Pr Pg

PO-15

 .156 5/32 4.0 .120 ±.004 .002 .039 +.006 .018 .110 .
±.003		 .035 ±.002 .42 .39 457 110

PO-18

 .188 3/16 4.8 .148 ±.005 .002 .039 .020 .140 .035 .63 .42 609 130

PO-25

 .250 1/4 6.4 .210 ±.006 .003 .039 .020 .I88 .035 .84 .52 914 200

PO-31

 .312 5/16 7.9 .272 .003 .046 .020 .250 .042 1.46 .63 1320 250

PO-37

 .375 3/8 9.5 .331 .003 .046 .022 .312 ±.004 .042 1.92 .72 1573 300

PO-43

 .438 7/16 11.1 .390 ±.008 .003 .056 .024 .375 .050 2.66 .79 2233 400

PO-50

 .500 1/2 12.7 .440 .004 .056 .030 .406 .050 3.30 .89 2538 600

PO-62

 .625 5/8 15.9 .531 .004 .056 .047 .500 ±.005 .050 4.65 1.03 3045 1100

PO-75

 .750 3/4 19.0 .632 ±.010 .004 .068 +.008 .059 .594 .062 .
±.003		 6.35 1.17 4669 1600

PO-100

 1.000 1 25.4 .860 .004 .086 .070 .812 ±.006 .078 12.65 1.51 7613 2600

PO-125

 1.250 1 -1/4 31.8 1.090 .006 .103 .080 1.032 .093 25.20 1.90 11165 3500

PO-150

 1.500 1 -1/2 38.1 1.317 ±.015 .008 .120 +.010 .091 1.250 ±.008 .109 36.3 2.18 15530 4800

PO-175

 1.750 1-3/4 44.4 1.480 .010 .139 .135 1.406 ±.010 .125 ±.004 53.0 2.45 20808 8200

PO-200

 2.000 2 50.8 1.730 .012 .139 .135 1.625 ±.015 .125 69.2 2.83 23853 9450

POL-15

 .156 5/32 4.0 .120 ±.004 .002 .029 +.006 .018 .110 ±.003 .025 ±.002 .30 .39 325 110

POL-18

 .188 3/16 4.8 .148 ±.005 .002 .029 .020 .140 .025 .45 .42 436 130

POL-25

 .250 1/4 6.4 .210 ±.006 .003 .029 .020 .188 .025 .60 .52 650 200

POL-31

 .312 5/16 7.9 .272 .003 .029 .020 .250 .025 .87 .63 792 250

POL-37

 .375 3/8 9.5 .331 .003 .039 .022 .312 ±.004 .035 1.60 .72 1320 300

POL-43

 .438 7/16 11.1 .390 ±.008 .003 .039 .024 .375 .035 1.86 .79 1878 400

POL-50

 .500 1/2 12.7 .440 .004 .046 .030 .406 .042 2.77 .89 2132 600

POL-62

 .625 5/8 15.9 .531 .004 .046 .047 .500 ±.005 .042 3.65 1.03 2538 1100

POL-75

 .750 3/4 19.0 .632 ±.010 .004 .056 +.008 .059 .594 .050 5.35 1.17 3756 1600

POL-100

 1.000 1 25.4 .860 .004 .056 .070 .812 ±.006 .050 8.60 1.51 4872 2600
*F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.
NOTE: THIS GROUP CONTAINS ALTERNATE, THICKNESS VALUES (COLUMN "T"). OTHER PARAMETERS SUCH AS WIDTH OF GROOVE ("W") AND THRUST LOAD "Pr" ALSO DIFFER FROM STANDARD VERSIONS. PLEASE TAKE THIS INTO CONSIDERATION WHEN SELECTING A PO RING FOR YOUR DESIGN.
 
 back to Constant Section Rings index
Visa & MasterCard - Same Day Shipping
same day shipping
 Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955  
sales@prospectfastener.com		  
A4092 retaining rings ISO9001:2000



Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map