| RING NO. | SHAFT | GROOVE SIZE | RING SIZE & WEIGHT | Clear. | î Thrust ld. (lbs.) Sq. Corner Abutment | |||||||||||
| DIAMETER | DIAMETER | WIDTH | DEPTH | FREE DIAMETER | THICKNESS *** |
Weight Per 1000 Pcs. | Dia. Installed in groove | |||||||||
| Ring Safety factor of 3 | Groove Safety factor of 2 | |||||||||||||||
| Ds DEC |
Ds FRACT |
Ds mm |
||||||||||||||
| Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lbs. | L2 | Pr | Pg | ||||
| LC-46 | .469 | 15/32 | 11.9 | .419 | ±.0015 .004* |
.039 | +.003 -.000 |
.025 | .414 | ±.002 | .035 | ±.002 | 1.36 | .640 | 2030 | 620 |
| LC-50 | .500 | 1/2 | 12.7 | .464 | .039 | .018 | .459 | .035 | 1.50 | .680 | 2132 | 480 | ||||
| LC-59 | .594 | 19/32 | 15.1 | .544 | .039 | .025 | .538 | .035 | 1.74 | .766 | 2538 | 790 | ||||
| LC-62 | .625 | 5/8 | 15.9 | .575 | .039 | .025 | .569 | .035 | 1.82 | .797 | 2690 | 830 | ||||
| LC-66 | .669 | - | 17.0 | .599 | ±.002 *.004 |
.046 | .035 | .593 | ±.003 | .042 | 3.1 | .886 | 3400 | 1250 | ||
| LC-75 | .750 | 3/4 | 19.0 | .680 | .046 | .035 | .673 | .042 | 3.5 | .967 | 3806 | 1400 | ||||
| LC-78 | .781 | 25/32 | 19.8 | .711 | .046 | .035 | .703 | .042 | 3.6 | .998 | 4009 | 1450 | ||||
| LC-87 | .875 | 7/8 | 22.2 | .805 | .046 | .035 | .796 | .042 | 3.8 | 1.092 | 4466 | 1600 | ||||
| LC-98 | .984 | 63/64 | 25.0 | .872 | ±.003 *.004 |
.056 | +.004 -.000 |
.056 | .863 | ±.004 | .050 | 7.3 | 1.273 | 5938 | 2900 | |
| LC-98 | 1.000 | 1 | 25.4 | .872 | .056 | .064 | .863 | .050 | 7.3 | 1.273 | 5938 | 3400 | ||||
| LC-112 | 1.125 | 1-1/8 | 28.6 | 1.013 | . ±.003 *.005 |
.056 | .056 | 1.002 | .050 | 7.9 | 1.42 | 6801 | 3350 | |||
| LC-118 | 1.188 | 1-3/16 | 30.2 | 1.075 | .056 | .056 | 1.064 | .050 | 8.5 | 1.48 | 7207 | 3500 | ||||
| LC-125 | 1.250 | 1-1/4 | 31.7 | 1.138 | .056 | .056 | 1.126 | .050 | 8.9 | 1.54 | 7562 | 3700 | ||||
| LC-137 | 1.375 | 1-3/8 | 34.9 | 1.263 | .056 | .056 | 1.250 | .050 | 9.6 | 1.67 | 8323 | 4100 | ||||
| LC-150 | 1.500 | 1-1/2 | 38.1 | 1.388 | .056 | .056 | 1.374 | .050 | 10.6 | 1.79 | 9084 | 4450 | ||||
| LC-156 | 1.562 | 1-9/16 | 39.7 | 1.427 | ±.005 *.005 |
.068 | .068 | 1.412 | ±.005 | .062 | ±.003 | 16.4 | 1.91 | 11926 | 5650 | |
| LC-162 | 1.625 | 1-5/8 | 41.3 | 1.489 | .068 | .068 | 1.474 | .062 | 17.5 | 1.97 | 12434 | 5850 | ||||
| LC-175 | 1.750 | 1 -3/4 | 44.4 | 1.614 | .068 | .068 | 1.597 | .062 | 18.4 | 2.10 | 13398 | 6300 | ||||
| LC-175 | 1.772 | - | 45.0 | 1.614 | .068 | .078 | 1.597 | .062 | 18.4 | 2.10 | 13398 | 7350 | ||||
| LC-187 | 1.875 | 1-7/8 | 47.6 | 1.739 | .068 | .068 | 1.721 | .062 | 20.8 | 2.22 | 14312 | 6800 | ||||
| LC-196 | 1.969 | 1-31/32 | 50.0 | 1.797 | .086 | +.005 -.000 |
.086 | 1.779 | ±.006 | .078 | 31.0 | 2.37 | 18524 | 9000 | ||
| LC-200 | 2.000 | 2 | 50.8 | 1.828 | .086 | .086 | 1.809 | .078 | 31.6 | 2.40 | 18778 | 9150 | ||||
| LC-212 | 2.125 | 2-1/8 | 54.0 | 1.953 | ±.005 *.006 |
.086 | .086 | 1.933 | .078 | 34.2 | 2.52 | 19996 | 9700 | |||
| LC-212 | 2.156 | 2-5/32 | 54.8 | 1.953 | .086 | .101 | 1.933 | .078 | 34.2 | 2.52 | 19996 | 11500 | ||||
| LC-225 | 2.250 | 2-1/4 | 57.1 | 2.078 | .086 | .086 | 2.057 | .078 | 37.3 | 2.65 | 21112 | 10300 | ||||
| LC-237 | 2.375 | 2-3/8 | 60.3 | 2.203 | .086 | .086 | 2.180 | .078 | 38.9 | 2.77 | 22330 | 10800 | ||||
| LC-250 | 2.500 | 2-1/2 | 63.5 | 2.328 | .086 | .086 | 2.304 | .078 | 39.7 | 2.90 | 23548 | 11400 | ||||
| LC-262 | 2.625 | 2-5/8 | 66.7 | 2.453 | .086 | .086 | 2.428 | .078 | 43.9 | 3.02 | 24665 | 12000 | ||||
| LC-275 | 2.750 | 2-3/4 | 69.8 | 2.544 | ±.006 *.006 |
.103 | .103 | 2.518 | ±.008 | .093 | 63.2 | 3.25 | 30653 | 15000 | ||
| LC-287 | 2.875 | 2-7/8 | 73.0 | 2.669 | .103 | .103 | 2.642 | .093 | 68.4 | 3.37 | 32074 | 15700 | ||||
| LC-300 | 3.000 | 3 | 76.2 | 2.794 | .103 | .103 | 2.754 | .093 | 70.4 | 3.50 | 33495 | 16400 | ||||
| LC-325 | 3.250 | 3-1/4 | 82.5 | 3.044 | .103 | .103 | 3.013 | .093 | 77.6 | 3.75 | 36286 | 17800 | ||||
| LC-337 | 3.375 | 3-3/8 | 85.7 | 3.145 | .120 | .115 | 3.114 | .109 | 94.0 | 3.99 | 44153 | 20600 | ||||
| *F.I.M.
(FULL INDICATOR MOVEMENT) -MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY
BETWEEN GROOVE AND SHAFT. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. ***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
 back to Constant Section Rings index |
|||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
