rotor clip retaining rings

RING NO. SHAFT GROOVE SIZE RING SIZE & WEIGHT CLEARANCE DIA. î THRUST LD. (lbs.) Sqr. corner abutment
DIAMETER DIAMETER WIDTH DEPTH FREE
DIAMETER		 THICKNESS
***		 Weight. Per 1000 pcs. Free outside dia. REF. Installed in groove
Ring Safety factor of 3 Groove
Safety factor
of 2
Ds
DEC		 Ds
FRAC		 Ds
mm
Dg Tol. W Tol. d Df Tol. T Tol. lbs. G L2 Pr Pg
**E-4 .040 - 1.0 .026

+.002

-.000
*.0015

.012 +.002
.
-.000		 .007 .025 +.001 .010 ±.001 ±.001 .009 .079 .090 13 6
E-6 .062 1/16 1.6 .052 .012 .005 .051 .010 .030 .156 .165 20 7
SE-6 .062 1/16 1.6 .052 .012 .005 .051 -.003 .010 . .028 .140 .150 20 7
YE-6 .062 1/16 1.6 .052 .023 .005 .051 .020 ±.002 .094 .187 .200 41 7
SE-9 .094 3/32 2.4 .074 .020 .010 .069

+.002
-.003

 .015 ±.002 .10 .230 .245 46 20
E-9 .094 3/32 2.4 .074 .020 .010 .073 +.001 -.003 .015 .058 .187 .200 46 20
SE-11 .110 7/64 2.8 .079 .020 .015 .076 .015 .31 .375 .390 61 40
SE-12 .125 1/8 3.2 .095 .029 .015 .094 .025 .12 .214 .225 110 45
E-12 .125 1/8 3.2 .095 .020 .015 .094 .015 .087 .230 .240 66 45
SE-14 .140 9/64 3.6 .102 .020 .019 .100 .015 .060 .203 .215 76 60
YE-14 .140 9/64 3.6 .110 .
+.002 -.000 *.002		 .020 .015 .108 .015 .10 .250 .265 76 45
E-14 .140 9/64 3.6 .105 .029 +.003
-.000		 .017 .102 .025 .21 .270 .285 173 60
SE-15 .156 5/32 4.0 .118 .046 .019 .116 .042 .76 .375 .390 300 70
E-15 .156 5/32 4.0 .116 .029 .020 .114 .025 .21 .282 .295 178 75
SE-17 .172 11/64 4.4 .127 .029 .022 .125 .025 .24 .312 .325 183 90
SE-18 .188 3/16 4.8 .125 .029 .031 .122 .025 .45 .375 .39 203 135
YE-18 .188 3/16 4.8 .147 .029 .020 .145 .025 .70 .470 .485 193 90
ZE-18 .188 3/16 4.8 .125 .029 .031 .122 .025 1.05 .550 .565 203 135
E-18 .188 3/16 4.8 .147 .029 .020 .145 .025 .29 .335 .35 193 90
SE-21 .219 7/32 5.6 .188 .029 .015 .185 .025 .47 .437 .45 228 75
E-25 .250 1/4 6.3 .210 .
+.003 -.000 *.004		 .029 .020 .207 .025 .76 .527 .54 259 115
SE-31 .312 5/16 7.9 .250 .029 .031 .243 +.002 -.004 .025 .57 .500 .52 330 225
YE-31 .312 5/16 7.9 .250 .029 .031 .243 .025 1.22 .670 .685 325 220
SE-37 .375 3/8 9.5 .306 .039 .034 .303 .035 1.05 .567 .587 680 300
E-37 .375 3/8 9.5 .303 .039 .036 .300 .035 1.5 .660 .68 700 315
E-43 .438 7/16 11.1 .343 .039 .047 .337 .035 1.5 .687 .71 842 480
SE-43 .438 7/16 11.1 .380 .039 .029 .375 .035 1.0 .600 .62 812 280
E-50 .500 1/2 12.7 .396 .046 .052 .392 .042 2.5 .800 .82 1127 600
E-62 .625 5/8 15.9 .485 .046 .070 .480 .
+.003 -.005		 .042 3.2 .940 .96 1441 1050
SE-74 .750 3/4 19.0 .625 .056 .062 .616 .050 4.3 1.000 1.02 1979 1100
E-75 .750 3/4 19.0 .580 .056 .085 .574 .050 5.8 1.120 1.14 2030 1500
E-87 .875 7/8 22.2 .675 .056 .100 .668 .050 7.6 1.300 1.32 2385 2050
SE-98 .984 63/64 25.0 .835 .056 .074 .822 .050 9.2 1.500 1.53 2639 1750
SE-98 1.000 1 25.4 .835 .056 .082 .822 .050 9.2 1.500 1.53 2690 1900
SE-118 1.188 1-3/16 30.2 1.079 +.005
-.000
*.005		 .068 +.004
-.000		 .054 1.066 +.006 -.010 .062 ±.003 11.3 1.626 1.67 3501 1500
SE-137 1.375 1-3/8 34.9 1.230 .068 .072 1.213 .062 15.4 1.875 1.92 4162 2350
* F.I.M. (FULL INDICATOR MOVEMENT)- MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT.
** AVAILABLE IN BERYLLIUM COPPER ONLY.
î BASED ON GROOVES MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND 0THER PERFORMANCE DATA CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT.
*** FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM.
 
 back to Rotor Clip Retaining Rings index chart
Visa & MasterCard - Same Day Shipping
same day shipping
 Prospect Fastener Corporation
1295 Kyle Court, Wauconda, IL 60084
Call 1.800.822.6080 or Fax 1.847.526.2955  
sean@prospectfastener.com		  
retaining rings



Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map