| RING NO. |
SHAFT |
GROOVE SIZE |
RING SIZE & WEIGHT |
CLEARANCE DIA. |
î THRUST LD. (lbs.) Sqr. Corner Abutment | ||||||||||||
| DIAMETER | DIAMETER | WIDTH | DEPTH | FREE DIAMETER |
THICKNESS ** |
Wght. Per 1000 Pcs. | Free outside dia. REF. | Released in groove |
|||||||||
| Ring Safety factor of 4 | Groove Safety factor of 2 |
||||||||||||||||
| Ds DEC |
Ds FRACT |
Ds mm |
|||||||||||||||
| Dg | Tol. | W | Tol. | d | Df | Tol. | T | Tol. | lbs. | G | L2 | Pr | Pg | ||||
| C-12 | .125 | 1/8 | 3.2 | .106 | ±.0015 *.0015 | .020 | +.002 -.000 | .0095 | .102 | +.002 -.004 | .015 | ±.002 | .030 | .165 | .18 | 86 | 45 |
| C-15 | .156 | 5/32 | 4.0 | .135 | .020 | .0105 | .131 | .015 | .052 | .205 | .22 | 102 | 55 | ||||
| C-18 | .188 | 3/16 | 4.8 | .165 | .020 | .011 | .161 | .015 | .062 | .244 | .25 | 132 | 70 | ||||
| C-21 | .219 | 7/32 | 5.6 | .193 | ±.002 *.0015 |
.029 | +.003 -.000 | .013 | .187 |
. +.003 -.005 |
.025 | .120 | .275 | .29 | 264 | 100 | |
| C-23 | .236 | 15/64 | 6.0 | .208 | .029 | .014 | .203 | .025 | .15 | .295 | .31 | 284 | 115 | ||||
| C-25 | .250 | 1/4 | 6.4 | .220 | ±.002 *.002 | .029 | .015 | .211 | .025 | .157 | .311 | .33 | 294 | 130 | |||
| C-28 | .281 | 9/32 | 7.1 | .247 | .029 | .017 | .242 | .025 | .19 | .346 | .36 | 335 | 165 | ||||
| C-31 | .312 | 5/16 | 7.9 | .276 | .029 | .018 | .270 | .025 | .226 | .376 | .39 | 376 | 200 | ||||
| C-37 | .375 | 3/8 | 9.5 | .335 | .029 | .020 | .328 | .025 | .300 | .448 | .47 | 447 | 270 | ||||
| C-40 | .406 | 13/32 | 10.3 | .364 | .029 | .021 | .359 | .025 | .352 | .486 | .50 | 487 | 300 | ||||
| C-43 | .438 | 7/16 | 11.1 | .393 | .029 | .022 | .386 | .025 | .359 | .517 | .53 | 528 | 350 | ||||
| C-50 | .500 | 1/2 | 12.7 | .450 | ±.003 *.004 | .039 | .025 | .441 | ±.006 | .035 | .671 | .581 | .60 | 842 | 450 | ||
| C-56 | .562 | 9/16 | 14.3 | .507 | .039 | .028 | .497 | .035 | .710 | .653 | .67 | 944 | 550 | ||||
| C-62 | .625 | 5/8 | 15.9 | .563 | .039 | .031 | .553 | .035 | .937 | .715 | .74 | 1045 | 700 | ||||
| C-68 | .688 | 11/16 | 17.5 | .619 | .046 | .034 | .608 | ±.007 | .042 | 1.3 | .784 | .80 | 1726 | 800 | |||
| C-75 | .750 | 3/4 | 19.0 | .676 | .046 | .037 | .665 | .042 | 1.5 | .845 | .87 | 1878 | 1000 | ||||
| C-81 | .812 | 13/16 | 20.6 | .732 | .046 | .040 | .721 | .042 | 1.7 | .915 | .94 | 2040 | 1150 | ||||
| C-87 | .875 | 7/8 | 22.2 | .789 | .046 | .043 | .777 | .042 | 2.0 | .991 | 1.01 | 2202 | 1300 | ||||
| C-93 | .938 | 15/16 | 23.8 | .843 | .046 | .047 | .830 | .042 | 2.3 | 1.058 | 1.08 | 2355 | 1550 | ||||
| C-100 | 1.000 | 1 | 25.4 | .900 | .046 | .050 | .887 | .042 | 2.7 | 1.130 | 1.15 | 2517 | 1800 | ||||
| C-112 | 1.125 | 1-1/8 | 28.6 | 1.013 | ±.004 *.005 | .056 | +.004 -.000 | .056 | .997 |
. ±.008 |
.050 | 4.0 | 1.267 | 1.30 | 3370 | 2200 | |
| C-125 | 1.250 | 1-1/4 | 31.7 | 1.126 | .056 | .062 | 1.110 | .050 | 5.1 | 1.415 | 1.44 | 3735 | 2700 | ||||
| C-137 | 1.375 | 1-3/8 | 34.9 | 1.237 | .056 | .069 | 1.220 | .050 | 6.1 | 1.555 | 1.58 | 4111 | 3350 | ||||
| C-150 | 1.500 | 1-1/2 | 38.1 | 1.350 | .056 | .075 | 1.331 | .050 | 7.6 | 1.691 | 1.72 | 4486 | 4000 | ||||
| C-162 | 1.625 | 1-5/8 | 41.3 | 1.483 | ±.005 *.005 | .068 | .071 | 1.463 | ±.010 | .062 | ±.003 | 11.0 | 1.853 | 1.88 | 5506 | 4650 | |
| C-175 | 1.750 | 1-3/4 | 44.4 | 1.576 | .068 | .087 | 1.555 | .062 | 12.9 | 1.975 | 2.01 | 6526 | 5300 | ||||
| C-200 | 2.000 | 2 | 50.8 | 1.800 | .068 | .100 | 1.777 | .062 | 16.2 | 2.257 | 2.30 | 7410 | 7000 | ||||
| *F.I.M.(FULL
INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY
BETWEEN GROOVE AND SHAFT. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPT. ** FOR PLATED RINGS ADD .002" TO THE LISTED MAXIMUM THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
 back to Rotor Clip Retaining Rings
index chart |
|||||||||||||||||||
 |
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
|||||||||||||||||||
|
Retaining Rings | Retaining Rings-Tapered Sections | SH | HO | E | C | TX | TI | Constant Section Rings | HN | UHO | UHB | USC | USH | SNL | SHCSHO | RHCRHO | HBL | SR | SB | CFS | CFH | CBS | CRS | CRH | Metric Retaining Rings | DSH | DHO | DE | DC | DTX | DTI | Rotor Clip Assembly Tools | Rotor Clip Assortment Kits | RCE1287SS | RCE1287STPA | RCI25175SS | RCI25175STPA | RCX25125SS | RCX25125STPA | RCDE2.319SS | RCDE2.319STPA | RCDH0824SS | RCDH0824STPA | RCDSH824SS | RCDSH824STPA | Constant Section Rings | Ringmaster Assortment Kits | Assembly Tools | Ringmaster Assortment Kits | E100 | Smalley Assortment Kits | SRIX50150ST PA | SRIX50150SS | Clamps | Clamps & Clips | KMC Assortment Kits | COV1871000 | Pins | Assortment Kits | Custom Packaging | Company Profile | Corporate Philosophy | Corporate Contact List | Directions | News/Events | Press Releases | Articles | Trade shows | New Products & Programs | New ad campaign | Sales Contacts | Home | Site Map |
|
